Abstract:Optoelectronic losses due to recombination at the transition region between the asymmetric heterocontacts in interdigitated back contact (IBC) silicon (Si) heterojunction (HJ) solar cells (SCs) tend to hinder a respectable performance-to-cost ratio for c-Si photovoltaics. In this study, we investigated new principles of field-effect passivation incorporating built-in fixed charges in dielectric passivation thin films (DPTFs) on the rear transition/gap region for photovoltaic performance optimization. Negative/positive polarity rear gap fixed charges of a density |Qf| up to 1013 cm−2 significantly enhance hole/electron transport across the transition gap, hence boosting the power conversion efficiency (PCE). Numerical simulations of the electric fields, energy band structures, electron and hole concentrations and current densities revealed how high efficiencies can be achieved through suppression of carrier recombination at the front- and rear-side interfaces, enhancement of carrier selectivity at the heterocontacts, and widening of the minority carrier transport channel in the bulk c-Si, especially in thinner IBC-HJ SCs. While the |Qf| requirement for high PCE is less stringent for high quality chemical passivation of the transition region, negative polarity fixed charges are generally advantageous if |Qf| > 5 × 1011 cm−2, otherwise if |Qf| < 5 × 1011 cm−2, positive polarity fixed charges would allow a high efficiency. Furthermore, poor quality chemical passivation of the front surface or electron transport layer (ETL) can be sufficiently compensated by a high density of negative polarity transition region charges to obtain a superior PCE, and allowing a high tolerance to the ETL fill rate and device pitch.

Tuning of the Contact Properties for High-Efficiency Si/PEDOT:PSS Heterojunction Solar Cells

Interfacial Band Engineering of Highly Efficient PEDOT:PSS/p‐Si/ZnO Heterojunction Solar Cells

Pedot:Pss/Planar-Si Hybrid Solar Cells With 12.70% Efficiency

Structure Optimization and Passivation Strategy Toward Efficient Integrated Perovskite/Pseudo‐Planar Heterojunction Solar Cells

Dopant‐Free and Carrier‐Selective Heterocontacts for Silicon Solar Cells: Recent Advances and Perspectives

Potential of PEDOT:PSS as a hole selective front contact for silicon heterojunction solar cells

PEDOT:PSS-Nafion/n-Si Hybrid Heterojunction TOPCon Solar Cells: Experiment and Simulation

Tuning the Phase Separation of PEDOT:PSS Affords Efficient Lead-Free Perovskite Solar Cells

Rapid and low temperature micro inverted pyramid texturing of silicon via copper catalyzed chemical etching for high efficiency PEDOT:PSS/silicon hybrid solar cells

Improved Interfacial Contact for Pyramidal Texturing of Silicon Heterojunction Solar Cells

Realization of 13.6% Efficiency on 20 μm Thick Si/Organic Hybrid Heterojunction Solar Cells via Advanced Nanotexturing and Surface Recombination Suppression

Solution-Processed Back-Contact PEDOT:PSS/n-Si Heterojunction Solar Cells

Photovoltaic Device Application of a Hydroquinone-Modified Conductive Polymer and Dual-Functional Molecular Si Surface Passivation Technology

Simultaneously Enhancing the Efficiency and Stability of Perovskite Solar Cells by Using P3HT/PEDOT:PSS as a Double Hole Transport Layer

Visualizing Interfacial Energy Offset and Defects in Efficient 2D/3D Heterojunction Perovskite Solar Cells and Modules

The role of transition region charges between dopant-free asymmetric heterocontacts in interdigitated back contact silicon heterojunction solar cells

Perovskite Solar Cells with 18.21% Efficiency and Area over 1 Cm(2) Fabricated by Heterojunction Engineering

Principles of dopant-free electron-selective contacts based on tunnel oxide/low work-function metal stacks and their applications in heterojunction solar cells

Photoinduced Field-Effect Passivation From Negative Carrier Accumulation for High Efficiency Silicon/Organic Heterojunction Solar Cells.

Nanostructural Optimization Of Silicon/Pedot: Pss Hybrid Solar Cells For Performance Improvement

Hierarchical Dual‐Scaffolds Enhance Charge Separation and Collection for High Efficiency Semitransparent Perovskite Solar Cells