Abstract:Highlights • 1. The power conversion efficiency of the silicon-organic hybrid solar cell is about 31.6 % higher than that of the original solar cell of 11.53 %. • 2. The outstanding optical and electrical characteristics of V 2 O 5 particles enable PEDOT:PSS/Si heterojunction solar cells to achieve V oc of 652 mV. • 3. The performance of the device is affected by the amount of V 2 O 5 in the composite film. • 4. The PEDOT: PSS film was removed at the edge of the Si substrate as a window layer. In recent years, a novel PEDOT:PSS/n-Si planar heterojunction solar cell has been extensively studied in the photovoltaic field. Different V 2 O 5 -IPA concentrations mixed in PEDOT:PSS samples as hole transport layer were prepared by means of spin coating technique and mechanical mixing of organic and inorganic materials. V 2 O 5 was studied for its effects on the surface morphology, chemical composition, and optical transmittance of PEDOT:PSS films. The findings of the study show that the addition of V 2 O 5 particles changes the surface morphology of PEDOT:PSS films and promotes its superior ohmic contact with the Si interface. Furthermore, PEDOT:PSS incorporated with V 2 O 5 particles that have outstanding optical and semiconductor properties reduces the rate of carrier recombination at the device interface and blocks electron transport to the anode in the fabricated Si-based solar cells. When compared to conventional PEDOT:PSS/Si planar heterojunction solar cells, the fill factor, photoelectric conversion efficiency, open-circuit voltage, and short-circuit current density of the devices prepared in this study can be significantly improved, reaching up to 70.98 %, 15.17 %, 652 mV and 32.8 mA/cm 2 , respectively. This research provides a promising and effective method for improving the photoelectric conversion performance of PEDOT:PSS/Si heterojunction solar cells, which enables the application of V 2 O 5 in Si solar cells. Graphical abstract Download : Download high-res image (182KB) Download : Download full-size image

Pedot:Pss/Planar-Si Hybrid Solar Cells With 12.70% Efficiency

Tuning of the Contact Properties for High-Efficiency Si/PEDOT:PSS Heterojunction Solar Cells

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

High-Efficiency Si-Organic Hybrid Solar Cells Using Au@Mos2 Doped Pedot:Pss

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Over 16% Efficiency Organic/nanostructured Si Heterojunction Solar Cells with a P-Doped Organic Small Molecule Layer

Interfacial Band Engineering of Highly Efficient PEDOT:PSS/p‐Si/ZnO Heterojunction Solar Cells

Highly Efficient Organic/Silicon Hybrid Solar Cells with a MoO3 Capping Layer

Planar Organic‐Si Hybrid Solar Cell with MoO x Mixed PEDOT:PSS as Hole Injection Layer Profits from Mo 5+ and Mo 6+ Synergistic Effects

Flexible Silver Grid/Pedot:Pss Hybrid Electrodes for Large Area Inverted Polymer Solar Cells

Improving open-circuit voltage and short-circuit current of high-efficiency silicon-based planar heterojunction solar cells by combining V 2 O 5 with PEDOT:PSS

PEDOT:PSS-Nafion/n-Si Hybrid Heterojunction TOPCon Solar Cells: Experiment and Simulation

Silicon/Organic Hybrid Solar Cells with 16.2% Efficiency and Improved Stability by Formation of Conformal Heterojunction Coating and Moisture‐Resistant Capping Layer

Phosphorus and Selenium Co‐Doped WO3 Nanoparticles for Interface Modification and Photovoltaic Properties Enhancement of Monolayer Planar Silicon/PEDOT:PSS Hybrid Solar Cells

Achieving 19% Power Conversion Efficiency in Planar‐Mixed Heterojunction Organic Solar Cells Using a Pseudo‐Symmetric Electron Acceptor

Nanostructural Optimization Of Silicon/Pedot: Pss Hybrid Solar Cells For Performance Improvement

High Performance Nanostructured Silicon-Organic Quasi P-N Junction Solar Cells Via Low-Temperature Deposited Hole and Electron Selective Layer.

GaAs nanowire/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) hybrid solar cells

Potential of PEDOT:PSS as a hole selective front contact for silicon heterojunction solar cells

Photovoltaic Device Application of a Hydroquinone-Modified Conductive Polymer and Dual-Functional Molecular Si Surface Passivation Technology

PEDOT:PSS‐Free Polymer Non‐Fullerene Polymer Solar Cells with Efficiency up to 18.60% Employing a Binary‐Solvent‐Chlorinated ITO Anode