Abstract:A novel strategy employing core shell nanowire arrays (NWAs) consisting of Si/regioregular poly-(3-hexylthiophene) (P3HT) was demonstrated to facilitate efficient light harvesting and exciton dissociation/charge collection for hybrid solar cells (HSCs). We experimentally demonstrate broadband and omnidirectional light-harvesting characteristics of core shell NWA HSCs due to their subwavelength features, further supported by the simulation based on finite-difference time domain analysis. Meanwhile, core shell geometry of NWA HSCs guarantees efficient charge separation since the thickness of the P3HT shells Is comparable to the exciton diffusion length. Consequently, core shell HSCs exhibit a 61% Improvement of short-circuit current for a conversion efficiency (eta) enhancement of 31.1% as compared to the P3HT-infiltrated Si NWA HSCs with layers forming a flat air/polymer cell interface. The improvement of crystal quality of P3HT shells due to the formation of ordering structure at Si interfaces after air mass 1.5 global (AM 1.5G) illumination was confirmed by transmission electron microscopy and Raman spectroscopy. The core shell geometry with the interfacial Improvement by AM 1.5G illumination promotes more efficient exciton dissociation and charge separation, leading to eta improvement (similar to 140.6%) due to the considerable increase in V-oc from 257 to 346 mV, J(sc) from 11.7 to 18.9 mA/cm(2), and FF from 32.2 to 35.2%, which Is not observed in conventional P3HT-infiltrated Si NWA HSCs. The stability of the Si/P3HT core shell NWA HSCs in air ambient was carefully examined. The core shell geometry should be applicable to many other material systems of solar cells and thus holds high potential In third-generation solar cells.

GaAs nanowire/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) hybrid solar cells

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

Tuning of the Contact Properties for High-Efficiency Si/PEDOT:PSS Heterojunction Solar Cells

Silicon Nanowires Incorporated Efficient and Flexible PEDOT:PSS/Silicon Hybrid Solar Cells

Improved Photovoltaic Performance of GaAs/Carbon Nanotube Heterojunction Solar Cells with a Multifunctional Nafion/PEDOT:PSS Layer

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Vertically aligned ZnCdS nanowire arrays/P3HT heterojunctions for solar cell applications

Optimization of GaAs Nanowire Array for Solar Cells

Nanostructural Optimization Of Silicon/Pedot: Pss Hybrid Solar Cells For Performance Improvement

Pedot:Pss/Planar-Si Hybrid Solar Cells With 12.70% Efficiency

Substantial Improvement of Short Wavelength Response in n-SiNW/PEDOT:PSS Solar Cell

Carrier Dynamics of Nanopillar Textured Ultrathin Si Film/PEDOT:PSS Heterojunction Solar Cell

Carbon nanotube as hole-selective contact for high-efficiency full-area GaAs hybrid heterojunction solar cells

Phosphorus and Selenium Co‐Doped WO3 Nanoparticles for Interface Modification and Photovoltaic Properties Enhancement of Monolayer Planar Silicon/PEDOT:PSS Hybrid Solar Cells

High Performance Nanostructured Silicon-Organic Quasi P-N Junction Solar Cells Via Low-Temperature Deposited Hole and Electron Selective Layer.

Significant Efficiency Enhancement Of Hybrid Solar Cells Using Core-Shell Nanowire Geometry For Energy Harvesting

Optimization of p-i-n GaAs/AlGaAs Heterojunction Nanowire Solar Cell for improved Optical and Electrical Properties

Geometric optimization and performance enhancement of PEDOT: PSS/GaAs NP array based heterojunction solar cells

Optical Characteristics of Gaas Nanowire Solar Cells

Fabrication of High Voltage GaAs Micro-Solar Cell Arrays

Monolayer Graphene Film/Silicon Nanowire Array Schottky Junction Solar Cells