Abstract:Silicon-organic solar cells based on conjugated polymers such as poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) on n type silicon (n-Si) attract wide interest because of their potential for cost-effectiveness and high-efficiency. However, a lower barrier height Phi(b) and a shallow built in potential (V-bi) of Schottky junction between n-Si and PEDOT:PSS hinders the power conversion efficiency (PCE) in comparison with those of traditional p-n junction. Here, a strong inversion layer was formed on n Si surface by inserting a layer of 1, 4, 5, 8, 9, 11-hexaazatriphenylene hexacarbonitrile (HAT-CN), resulting in a quasi p-n junction. External quantum efficiency spectra, capacitance-voltage, transient photovoltage decay and minority charge carriers life mapping measurements indicated that a quasi p-n junction was built due to the strong inversion effect, resulting in a high Phi(b) and V-bi. The quasi p-n junction located on the front surface region of silicon substrates improved the short wavelength light conversion into photocurrent. In addition, a derivative perylene diimide (PDIN) layer between rear side of silicon and aluminum cathodes was used to block the holes from flowing to cathodes. As a result, the device with PDIN layer also improved photoresponse at longer wavelength. A champion PCE of 14.14% was achieved for the nanostructured silicon-organic device by combining HAT-CN and PDIN layers. The low temperature and simple device structure with quasi p-n junction promises cost-effective high performance photovoltaic techniques.

Carbon nanotube as hole-selective contact for high-efficiency full-area GaAs hybrid heterojunction solar cells

Carbon Nanotubes As Hole-Selective Contacts for High-Efficiency Full-Area GaAs Hybrid Heterojunction Solar Cells

Hybrid heterojunction and photoelectrochemistry solar cell based on silicon nanowires and double-walled carbon nanotubes.

Improved Photovoltaic Performance of GaAs/Carbon Nanotube Heterojunction Solar Cells with a Multifunctional Nafion/PEDOT:PSS Layer

Heterojunction Photovoltaic Devices Utilizing Single Wall Carbon Nanotube Thin Films and Silicon Substrates

Interface Passivation Treatment Enables GaAs/CNT Heterojunction Solar Cells over 19% Efficiency

Silicon Nanocrystal Conjugated Polymer Hybrid Solar Cells with Improved Performance

Multifunctional Graphene and Carbon Nanotube Films for Planar Heterojunction Solar Cells

GaAs nanowire/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) hybrid solar cells

Strong, Conductive Carbon Nanotube Fibers As Efficient Hole Collectors

Insights into the Application of Carbon Materials in Heterojunction Solar Cells

(Invited) Single-Walled Carbon Nanotubes and Graphene As Highly Efficient Hole Collecting and Transport Layer for Solar Cells

High Performance Nanostructured Silicon-Organic Quasi P-N Junction Solar Cells Via Low-Temperature Deposited Hole and Electron Selective Layer.

High Efficiency Organic-Si Hybrid Solar Cells with a One-Dimensional CdS Interlayer.

Hybrid, Gate-Tunable, van der Waals p-n Heterojunctions from Pentacene and MoS2

Cross-stacked superaligned carbon nanotube electrodes for efficient hole conductor-free perovskite solar cells

Solution-processed Graphene-MoS2 Heterostructure for Efficient Hole Extraction in Organic Solar Cells

Study on the Fabrication of PEDOT:PSS/Si Hybrid Solar Cells Incorporated with F4TCNQ and VTMO

High-performance hole transport layer based on WS2 doped PEDOT:PSS for organic solar cells

Solution-processed Bulk Heterojunction Solar Cells Based on Interpenetrating CdS Nanowires and Carbon Nanotubes

Vertically aligned ZnCdS nanowire arrays/P3HT heterojunctions for solar cell applications