Abstract:Solution-processed nanocrystal (NC) solar cell are attracting much attention for prospective application in low cost energy source; however, the worse collection of hole carriers at the hole interface limits the device performance further improvement. Here, a novel crosslinkable conjugated polymer poly(diphenylsilane-co-4-vinyl-triphenylamine) (Si-TPA) has been applied as the hole transport layer (HTL) for solution-processed CdTe nanocrystal (NC) solar cells. To the best of our knowledge, it is the first report with a crosslinkable conjugated polymer as the HTL in NC solar cells. It is found that the devices with Si-TPA HTL show much better performance than that of the devices without the HTL or with other polymer HTLs such as poly(9-vinylcarbazole) (PVK) and poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS). The improvement with incorporating Si-TPA is attributed to the better energy level matching between the NC film and the Au anode with a good ohmic contact among each interface. Interestingly, it is also observed that introducing Si-TPA can produce a higher open-circuit voltage compared to that without Si-TPA, originating from the interface dipole effect produced by Si-TPA. The improved fill factor value illustrates that the hole and electron carriers are more balanced in the devices with Si-TPA. The champion solar cell with a configuration of ITO/ZnO/CdSe/CdTe/Si-TPA/Au shows a PCE of 8.34%, which is a record for solution-processed CdTe NC solar cells to date with an inverted device structure. Furthermore, for another type of the solution-processed CdS NC device, a high PCE of 7.27% is also obtained with incorporating crosslinkable Si-TPA HTL, which is two times higher than that without Si-TPA, demonstrating the remarkable universality through this method. This work provides a new facile strategy in further increasing solution-processed NC solar cells performance by incorporating organic crosslinkable conjugated polymers as the HTL.

High Efficiency Organic-Si Hybrid Solar Cells with a One-Dimensional CdS Interlayer.

Over 16% Efficiency Organic/nanostructured Si Heterojunction Solar Cells with a P-Doped Organic Small Molecule Layer

Doping-Free Titanium Nitride Carrier Selective Contacts for Efficient Organic–Inorganic Hybrid Solar Cells

High Efficiency Organic/silicon Hybrid Solar Cells with Doping-Free Selective Emitter Structure Induced by a WO3 Thin Interlayer

High Efficiency Organic/Silicon-Nanowire Hybrid Solar Cells: Significance of Strong Inversion Layer

High Performance Nanostructured Silicon-Organic Quasi P-N Junction Solar Cells Via Low-Temperature Deposited Hole and Electron Selective Layer.

Silicon-nanocrystal-incorporated Ternary Hybrid Solar Cells

High-efficiency CNT-Si Solar Cells Based on a Collaborative System Enabled by Oxide Penetration

Naphthalene Diimide-Based n-Type Polymers: Efficient Rear Interlayers for High Performance Silicon-Organic Heterojunction Solar Cells.

Highly Efficient Organic/Silicon Hybrid Solar Cells with a MoO3 Capping Layer

High-Performance Ultrathin Organic-Inorganic Hybrid Silicon Solar Cells via Solution-Processed Interface Modification.

Interface Engineering For Both Cathode And Anode Enables Low-Cost Highly Efficient Solution-Processed Cdte Nanocrystal Solar Cells

The Bifunctional Tin-Doped Indium Oxide As Hole-Selective Contact and Collector in Silicon Heterojunction Solar Cell with A Stable Intermediate Oxide Layer

Pinhole-like Carriers Transport in Spin-Coating SiO2 Enabling High-Efficiency Dopant-Free Si Solar Cells

Vertically aligned ZnCdS nanowire arrays/P3HT heterojunctions for solar cell applications

High-efficiency solution-processed CdTe nanocrystal solar cells incorporating a novel crosslinkable conjugated polymer as the hole transport layer

Realization of 13.6% Efficiency on 20 μm Thick Si/Organic Hybrid Heterojunction Solar Cells via Advanced Nanotexturing and Surface Recombination Suppression

Improved Performance of Silicon Nanowire/cadmium Telluride Quantum Dots/organic Hybrid Solar Cells

Efficient Organic-Inorganic Hybrid Cathode Interfacial Layer Enabled by Polymeric Dopant and Its Application in Large-Area Polymer Solar Cells

Principles of dopant-free electron-selective contacts based on tunnel oxide/low work-function metal stacks and their applications in heterojunction solar cells

Self‐Diffusion Effect Assisted TiO2/Li3PO4 Electron Selective Passivating Contact in Silicon Solar Cells Approaching 23% Efficiency