Abstract:Complex silicon carbide (SiC) ceramic components are difficult to fabricate due to their strong covalent bonds. Binder jetting (BJ) additive manufacturing has the outstanding advantages of high forming efficiency and no thermal deformation, especially suitable for printing complex structure SiC components. This study tried to obtain low silicon content silicon carbide ceramics by binder jetting followed by phenolic resin impregnation and pyrolysis (PRIP) and liquid silicon infiltration (LSI). BJ was used for the SiC green parts fabrication, and the highest compressive strength (7.7 ± 0.3 MPa) and lowest dimensional deviations (1.2–1.6 mm) were obtained with the printing layer thickness of 0.15 mm. Subsequently, PRIP treatments were introduced to increase the carbon content for the following LSI process. As the number of PRIP cycles increased, the carbon density of SiC/C preform increased and the porosity decreased. After the LSI treatment, the final Si-SiC composites processed with 2 PIRP cycles reached the highest flexural strength (257 ± 14.26 MPa) and the best wear resistance. This was attributed to the low residual silicon content (10.2 vol%) and almost no residual carbon. Furthermore, several complex structural components were fabricated using these methods. The preparation of complex components verifies the feasibility of BJ and LSI for manufacturing high-strength and high-precision SiC ceramics. Besides, this work hopes to provide technical guidance for the preparation of complex SiC composites in the future.

Facile joining of SiC ceramics with screen-printed polycarbosilane without pressure

Study on crosslinking of polymers and joining mechanism of SiC ceramic

Joining of SiC ceramics by combining NITE-SiC interlayer and its thickness control

Joining SiC ceramics with ZrSi2–SiC filler at low temperatures

Joining of SiC Ceramic by Using the Liquid Polyvinylphenylsiloxane

Effects of the joining process on the microstructure and properties of liquid-phase-sintered SiC-SiC joints formed with Ti foil

Low temperature seamless joining of SiC using a Ytterbium film

Joining of pressureless sintered SiC using polysiloxane SR355 with active additive Ni nanopowder

Microstructure, Mechanical Property and Bonding Mechanism of SiC Ceramic Joint Using a Novel Y2Si2O7/Mullite Glass-Ceramic Interlayer

Near-seamless joining of Cf/SiC composites using Y3Si2C2 via electric field-assisted sintering technique

Microstructure and mechanical properties of SiC/SiC joints reinforced by in-situ growth SiC nanowires

Recent advances in joining of SiC-based materials (monolithic SiC and SiCf/SiC composites): Joining processes, joint strength, and interfacial behavior

SiC Ceramics Joined with an In-Situ Reaction Gradient Layer of TiC/Ti3SiC2 and Interface Stress Distribution Simulations

Preparation of low residual silicon content Si-SiC ceramics by binder jetting additive manufacturing and liquid silicon infiltration

High‐strength SiC joints fabricated at a low‐temperature of 1400°C using a novel low activation filler of Praseodymium

Effect of polycarbosilane content on microstructures and mechanical properties of short-carbon-fibre-reinforced SiC composites

Plasma-enhanced Si-SiC low-temperature bonding based on graphene composite slurry interlayer

Low-temperature joining of SiC ceramics by NITE phase using CaO-Al2O3-MgO-SiO2 glass as an additive combined with surface oxidation

Processing of Sic Ceramics with High Reliability Using Chemically Modified Polycarbosilane As A Compaction Binder

Joining of SiC using CoFeCrNiCuTi high entropy alloy filler by electric current field assisted sintering

Ultrafast low-temperature near-seamless joining of Cf/SiC using a sacrificial Pr3Si2C2 filler via electric current field-assisted sintering technique