Abstract:The separation of a natural gas mixture containing 85 mol% CH4 and 15 mol% N2 by dual reflux pressure swing adsorption (DR PSA) was investigated using dynamic non-isothermal numerical simulations previously benchmarked against experiments. Two different adsorbents were employed: a commercially available activated carbon (AC1) and the recently developed ionic liquidic zeolite (ILZ), which has about twice the selectivity for methane over nitrogen than the activated carbon. Four DR PSA cycle configurations (PL-A, PH-A, PL-B and PH-B) were studied and iteratively optimized in terms of separation performance and energy consumption. The dynamic non-isothermal simulations, implemented in the software platform Aspen Adsorption, included a polytropic compressor model with temperature dependent heat capacities for more realistic predictions of the compressor duty. The heavy product to feed ratio, the feed step time and the light reflux ratio were selected as key optimization parameters for all four cycles at fixed bed pressure ratio, feed location and feed flow rate. The simulations showed that A-cycles were superior to B-cycles in terms of their separation performance for both adsorbent materials. Overall, the separation performance achieved by AC1 was lower than that by ILZ. At optimized conditions for AC1, PL-A and PH-A cycles achieved approximately 92 mol% CH4 in the heavy product and 4.5 mol% CH4 in the light product with corresponding energy requirement at 9.9 kJ mol−1 (feed) and 8.7 kJ mol−1 (feed), while using the ILZ adsorbent, both PL-A and PH-A cycles were able to deliver 0.9 mol% CH4 in the light product and 93.5 mol% CH4 in the heavy product. The cycle work of the PL-A and PH-A configuration using ILZ was 8.8 and 7.7 kJ mol−1 (feed), respectively. These simulation results show that DR PSA processes using ionic liquidic zeolites can meet strict natural gas separation requirements and that such processes can efficiently upgrade sub-quality natural gas.

Methane/nitrogen separation through pressure swing adsorption process from nitrogen-rich streams

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Separation of Methane and Nitrogen Using Heavy Reflux Pressure Swing Adsorption: Experiments and Modeling

Separation of Methane–Nitrogen Mixture by Pressure Swing Adsorption for Natural Gas Upgrading

An improved vacuum pressure swing adsorption process with the simulated moving bed operation mode for CH4/N2 separation to produce high-purity methane

Multiscale design of a pressure swing adsorption process for natural gas purification

Gas-Phase Simulated Moving Bed for Methane/Nitrogen Separation Using a Commercial Activated Carbon

Separation of $CH_4/CO_2/N_2$ Mixture by Pressure Swing Adsorption

Nitrogen rejection from natural gas by dual reflux-pressure swing adsorption using activated carbon and ionic liquidic zeolite

Nitrogen rejection from low quality natural gas by pressure swing adsorption experiments and simulation using dynamic adsorption isotherms

Optimization of a Six-Step Pressure Swing Adsorption Process for Biogas Separation on a Commercial Scale

Economic assessment of a natural gas upgrading process using pressure vacuum swing adsorption for nitrogen removal

Modeling and simulation of the efficient separation of methane/nitrogen mixtures with [Ni3(HCOO)6] MOF by PSA

Pressure Swing Adsorption for Biogas Upgrading with Carbon Molecular Sieve

Biomethane production by adsorption technology: new cycle development, adsorbent selection and process optimization

Separation of methane and nitrogen using ionic liquidic zeolites by pressure vacuum swing adsorption

Purification of helium from a cryogenic natural gas nitrogen rejection unit by pressure swing adsorption

Advances in Pressure Swing Adsorption for Gas Separation

Natural gas treating by selective adsorption: Material science and chemical engineering interplay

Application analysis of layered pressure swing adsorption method for offshore floating natural gas purification

Nitrogen replacement strategy to efficiently enhance methane recovery of the methane purification process using nitrogen equilibrium selective sorbent