Abstract:The separation of a natural gas mixture containing 85 mol% CH4 and 15 mol% N2 by dual reflux pressure swing adsorption (DR PSA) was investigated using dynamic non-isothermal numerical simulations previously benchmarked against experiments. Two different adsorbents were employed: a commercially available activated carbon (AC1) and the recently developed ionic liquidic zeolite (ILZ), which has about twice the selectivity for methane over nitrogen than the activated carbon. Four DR PSA cycle configurations (PL-A, PH-A, PL-B and PH-B) were studied and iteratively optimized in terms of separation performance and energy consumption. The dynamic non-isothermal simulations, implemented in the software platform Aspen Adsorption, included a polytropic compressor model with temperature dependent heat capacities for more realistic predictions of the compressor duty. The heavy product to feed ratio, the feed step time and the light reflux ratio were selected as key optimization parameters for all four cycles at fixed bed pressure ratio, feed location and feed flow rate. The simulations showed that A-cycles were superior to B-cycles in terms of their separation performance for both adsorbent materials. Overall, the separation performance achieved by AC1 was lower than that by ILZ. At optimized conditions for AC1, PL-A and PH-A cycles achieved approximately 92 mol% CH4 in the heavy product and 4.5 mol% CH4 in the light product with corresponding energy requirement at 9.9 kJ mol−1 (feed) and 8.7 kJ mol−1 (feed), while using the ILZ adsorbent, both PL-A and PH-A cycles were able to deliver 0.9 mol% CH4 in the light product and 93.5 mol% CH4 in the heavy product. The cycle work of the PL-A and PH-A configuration using ILZ was 8.8 and 7.7 kJ mol−1 (feed), respectively. These simulation results show that DR PSA processes using ionic liquidic zeolites can meet strict natural gas separation requirements and that such processes can efficiently upgrade sub-quality natural gas.

Nitrogen replacement strategy to efficiently enhance methane recovery of the methane purification process using nitrogen equilibrium selective sorbent

Methane Recovery from Low-Grade Unconventional Natural Gas by the Integrated Mode of the Conventional/improved Vacuum Pressure Swing Adsorption Processes

An improved vacuum pressure swing adsorption process with the simulated moving bed operation mode for CH4/N2 separation to produce high-purity methane

Nitrogen rejection from low quality natural gas by pressure swing adsorption experiments and simulation using dynamic adsorption isotherms

Enrichment of Low-Grade Methane Gas from Nitrogen Mixture by VPSA with CO2 Displacement Process: Modeling and Experiment

Nitrogen rejection from natural gas by dual reflux-pressure swing adsorption using activated carbon and ionic liquidic zeolite

Efficient N2/CH4 separation in a stable metal–organic framework with high density of open Cr sites

Separation of Methane and Nitrogen Using Heavy Reflux Pressure Swing Adsorption: Experiments and Modeling

Methane Simultaneous Recovery from CH4/N2 Stream and CH4/CO2 Stream by the Displacement VPSA Process

CH4/N2 Adsorptive Separation by a ZSM-5 Zeolite Packed Multicolumn VPSA Process with the SMB Operation Mode for High- Purity Methane Production

Modeling and simulation of the efficient separation of methane/nitrogen mixtures with [Ni3(HCOO)6] MOF by PSA

Enrichment of Ventilation Air Methane by Adsorption with Displacement Chromatography Technology: Experiment and Numerical Simulation

A New Composite Sorbent for Methane-Nitrogen Separation by Adsorption

MIL-101-Cr/Fe/Fe-NH2 for Efficient Separation of CH4 and C3H8 from Simulated Natural Gas

Modelling Selective CO2 Absorption and Validation via Photosynthetic Bacteria and Chemical Adsorbents for Methane Purification in Anaerobic Fermentation Bioreactors

PSA separation of CH 4/N 2 mixture with carbon molecular sieve

Substituent-Induced Electron-Transfer Strategy for Selective Adsorption of N 2 in MIL-101(Cr)-X Metal–Organic Frameworks

Biogas Upgrading to Methane: Application of a Regenerable Polyethyleneimine-Impregnated Polymeric Resin (NKA-9) Via CO2 Sorption

Separation of methane and nitrogen using ionic liquidic zeolites by pressure vacuum swing adsorption

PSA separation of CH4/N2 mixture with carbon molecular sieve

Enhanced Methane Delivery in MIL-101(Cr) by Means of Subambient Cooling