Abstract:Methane is a clean fossil fuel and an important greenhouse gas, so it is more significant to recover methane from massive resources of unconventional gas. Because of the similar physicochemical properties of methane and nitrogen, it is difficult to obtain the high-purity methane from the low-grade methane gas with nitrogen mixture by the conventional vacuum pressure swing adsorption (VPSA) process. In this work, this process was improved, where multicolumn in series operation was adopted at both adsorption and displacement steps to enhance the CH4/N2 separation, and one column went on blowdown, purge, and pressurization steps for the effective regeneration of the adsorbent. In order to run the improved VPSA process automaticly, the SMB operation mode was introduced, synchronously shifting the inlet and outlet stream ports from one column to other column along the gas flow direction, and a countercurrent contact between the gas phase and adsorbent phase in the multicolumn system was formed to enhance the CH4/N2 separation. To verify the feasibility of the improved VPSA process, the experimental device with eight-column unit had been set up in laboratory, and 30% ~ 50% CH4 gases were denitrified by the improved VPSA process using activated carbon beads. The experimental results demonstrated that the improved VPSA process was capable of producing a high-purity CH4 product gas (99.99% CH4) meeting pipeline grid specification and a high-concentration N2 by-product gas meeting emission standards from 30% ~ 50% CH4 feed gases. In the end, we compared the CH4/N2 separation performance among the conventional VPSA process, dual reflux-pressure swing adsorption process, improved VPSA process with SMB operation mode, CO2 displacement VPSA process and concentration temperature swing adsorption process.

Modeling and simulation of the efficient separation of methane/nitrogen mixtures with [Ni3(HCOO)6] MOF by PSA

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Separation of Methane and Nitrogen Using Heavy Reflux Pressure Swing Adsorption: Experiments and Modeling

A New Composite Sorbent for Methane-Nitrogen Separation by Adsorption

Gas-Phase Simulated Moving Bed for Methane/Nitrogen Separation Using a Commercial Activated Carbon

Pore Chemically Modified Nickel-Based Metal-Organic Frameworks for Efficient Purification of Natural Gas

Highly Efficient Separation of Methane from Nitrogen on a Squarate‐based Metal‐organic Framework

Methane/nitrogen separation through pressure swing adsorption process from nitrogen-rich streams

Methane upgrading on pelletised Maxsorb activated carbon by gas-phase simulated moving bed

PSA separation of CH 4/N 2 mixture with carbon molecular sieve

An improved vacuum pressure swing adsorption process with the simulated moving bed operation mode for CH4/N2 separation to produce high-purity methane

Simulation and experiment for the pressure swing adsorption separation of methane and nitrogen

Nitrogen replacement strategy to efficiently enhance methane recovery of the methane purification process using nitrogen equilibrium selective sorbent

MIL-101-Cr/Fe/Fe-NH2 for Efficient Separation of CH4 and C3H8 from Simulated Natural Gas

A Scalable Pillar Layered Metal-Organic Framework for Natural Gas Purification

Water Resistant and Flexible MOF Materials for Highly Efficient Separation of Methane from Nitrogen

Enrichment of Low-Grade Methane Gas from Nitrogen Mixture by VPSA with CO2 Displacement Process: Modeling and Experiment

Nickel-Based Metal-Organic Frameworks for Coal-Bed Methane Purification with Record CH4/N2 Selectivity.

Pressure Swing Adsorption for Biogas Upgrading with Carbon Molecular Sieve

Robust Nickel-Based Metal–Organic Framework for Highly Efficient Methane Purification and Capture

Rational Construction of Ultrahigh Thermal Stable MOF for Efficient Separation of MTO Products and Natural Gas