Abstract:A dynamic pressure swing adsorption simulation model has been developed that caters for a detailed transport mechanism of nitrogen and methane in the micropores of both ETS-4 and CMS adsorbents. Five adsorbents, namely, barium-exchanged ETS-4 dehydrated at 400 °C (Ba400), strontium-exchanged ETS-4 dehydrated at 190 °C (Sr190) and 270 °C (Sr270), Bergbau–Forchung carbon molecular sieve (BF CMS), and Takeda carbon molecular sieve (Takeda CMS), have been selected for the simulation study in order to compare their performances for upgrading natural gas. The transport mechanisms of gases in CMS and ETS-4 adsorbents are different. In pressure swing adsorption (PSA) simulation, the binary equilibrium and kinetics are represented by the models that have recently been experimentally verified for methane–nitrogen mixture in Ba400, Sr190, and Sr270 adsorbents [Majumdar, B.; Bhadra, S. J.; Marathe, R. P.; Farooq, S. Ind. Eng. Chem. Res. 2011, 50, 3021]. The multisite Langmuir isotherm is used for adsorption equilibrium. The kinetic model takes into account diffusion in both macropores and micropores and the concentration dependence of micropore diffusivity according to the chemical potential gradient as the driving force with constant limiting micropore diffusivity. It also has the provision to allow for the dual transport resistance and strong concentration dependence of the thermodynamically corrected micropore transport coefficients in CMS according to the published results [Huang, Q.; Farooq, S.; Karimi, I. A. Langmuir 2003, 19, 5722]. Operating conditions have been identified that favor high recovery while simultaneously meeting the required pipeline specification for methane purity. The performance of the best sample for methane–nitrogen separation by PSA found from the simulation study, Ba400, is compared with published performances of ETS-4 and clinoptilolite. It has been found that, in addition to meeting pipeline specification, Ba400 also gives higher recovery, thus making this adsorbent a promising candidate for further exploration.

Pressure Swing Adsorption for Biogas Upgrading with Carbon Molecular Sieve

Optimization of a Six-Step Pressure Swing Adsorption Process for Biogas Separation on a Commercial Scale

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Biogas upgrading using shaped MOF MIL-160(Al) by pressure swing adsorption process: Experimental and dynamic modelling assessment

Multiscale design of a pressure swing adsorption process for natural gas purification

Separation of Methane–Nitrogen Mixture by Pressure Swing Adsorption for Natural Gas Upgrading

Advances in Pressure Swing Adsorption for Gas Separation

The removal of CO2 from biogas using a laboratory PSA unit: design using breakthrough curves

Biomethane production by adsorption technology: new cycle development, adsorbent selection and process optimization

Biogas upgrading to fuel quality by dynamic adsorption of activated charcoal under non-isothermal conditions

Evaluation of the CH4/CO2 separation by adsorption on coconut shell activated carbon: Impact of the gas moisture on equilibrium selectivity and adsorption capacity

Simulation of CO2 capture from natural gas by cyclic pressure swing adsorption process using activated carbon

An overview of biogas upgrading via pressure swing adsorption: Navigating through bibliometric insights towards a conceptual framework and future research pathways

Comparation of Adsorption Properties of Pressure Swing Sorbents for Biogas

Methane/nitrogen separation through pressure swing adsorption process from nitrogen-rich streams

Separation of Methane and Nitrogen Using Heavy Reflux Pressure Swing Adsorption: Experiments and Modeling

Production of green methane by carbon dioxide capture from landfill biogas via pressure swing adsorption mediated by MOF ZIF-8

CFD Simulation for Separation of Carbon Dioxide-Methane Mixture by Pressure Swing Adsorption

Enrichment of Low-Grade Methane Gas from Nitrogen Mixture by VPSA with CO2 Displacement Process: Modeling and Experiment

Multi-bed Vacuum Pressure Swing Adsorption for Carbon Dioxide Capture from Flue Gas

Mechanism Modeling of Elevated Temperature Pressure Swing Adsorption Process for Pre-Combustion Co2 Capture