Biomethane production by adsorption technology: new cycle development, adsorbent selection and process optimization

Najib Chouikhi,Federico Brandani,Pluton Pullumbi,Patrick Perre,Francois Puel
DOI: https://doi.org/10.1007/s10450-020-00250-3
2020-08-17
Adsorption
Abstract:Gas separation by adsorption processes such as pressure swing adsorption (PSA) presents an attractive alternative for upgrading biogas to biomethane. A new vacuum pressure swing adsorption (VPSA) cycle is proposed for a unit designed to purify pre-cleaned biogas (40% CO<sub>2</sub> and 60% CH<sub>4</sub>) in industrial conditions (feed flow rate more than 500 Nm<sup>3</sup>/h and large-volume equipment). The process simulations performed to optimize the VPSA unit consider the kinetic separation of the feed components by using an appropriate carbon molecular sieve (CMS) adsorbent having a high kinetic separation selectivity for CO<sub>2</sub> with respect to CH<sub>4</sub>. The designed VPSA unit is composed of five columns that perform three equalization steps. Minimizing methane losses during the regeneration steps necessitates injecting part of the off-gas rich in CO<sub>2</sub> at the bottom of the column during the production step to push the CH<sub>4</sub> forward. The produced biomethane meets the specification (97% CH<sub>4</sub>) of grid injection purity. The developed cycle allows a CH<sub>4</sub> recovery of 92% to be obtained with a specific energy consumption of 0.35 kWh/Nm<sup>3</sup>, thus meeting the initial requirements for industrial exploitation of VPSA technology for biomethane purification from biogas sources.
What problem does this paper attempt to address?