Abstract:In the pathway towards decarbonization, hydrogen can provide valid support in different sectors, such as transportation, iron and steel industries, and domestic heating, concurrently reducing air pollution. Thanks to its versatility, hydrogen can be produced in different ways, among which steam reforming of natural gas is still the most commonly used method. Today, less than 0.7% of global hydrogen production can be considered low-carbon-emission. Among the various solutions under investigation for low-carbon hydrogen production, membrane reactor technology has the potential, especially at a small scale, to efficiently convert biogas into green hydrogen, leading to a substantial process intensification. Fluidized bed membrane reactors for autothermal reforming of biogas have reached industrial maturity. Reliable modelling support is thus necessary to develop their full potential. In this work, a mathematical model of the reactor is used to provide guidelines for their design and operations in off-design conditions. The analysis shows the influence of temperature, pressures, catalyst and steam amounts, and inlet temperature. Moreover, the influence of different membrane lengths, numbers, and pitches is investigated. From the results, guidelines are provided to properly design the geometry to obtain a set recovery factor value and hydrogen production. For a given reactor geometry and fluidization velocity, operating the reactor at 12 bar and the permeate-side pressure of 0.1 bar while increasing reactor temperature from 450 to 500 °C leads to an increase of 33% in hydrogen production and about 40% in HRF. At a reactor temperature of 500 °C, going from 8 to 20 bar inside the reactor doubled hydrogen production with a loss in recovery factor of about 16%. With the reactor at 12 bar, a vacuum pressure of 0.5 bar reduces hydrogen production by 43% and HRF by 45%. With the given catalyst, it is sufficient to have only 20% of solids filled into the reactor being catalytic particles. With the fixed operating conditions, it is worth mentioning that by adding membranes and maintaining the same spacing, it is possible to increase hydrogen production proportionally to the membrane area, maintaining the same HRF.

Modelling and optimization of hybrid PSA/membrane separation processes

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Efficient Hybrid Strategy for Simultaneous Design of Refinery Hydrogen Networks and Pressure Swing Adsorption Unit

Process optimization of CO2membrane and cryogenic hybrid separation

Optimal Design of Hybrid Cryogenic Flash and Membrane System

Systematic Design and Optimization of a Membrane–Cryogenic Hybrid System for CO2 Capture

Simultaneous Design of Hydrogen Allocation Networks and PSA Inside Refineries

Simultaneous Optimization Of Hydrogen Network With Desulfurization Processes Embedded

Hydrogen Sulfide Removal Process Embedded Optimization of Hydrogen Network

Simulation and optimization of hydrogen separation from hydrogenation tail gas by hydrate-membrane coupled method

Green route for biomethane and hydrogen production via integration of biogas upgrading using pressure swing adsorption and steam-methane reforming process

Optimization of a Six-Step Pressure Swing Adsorption Process for Biogas Separation on a Commercial Scale

Multiscale design of a pressure swing adsorption process for natural gas purification

An innovative gas management methodology based on PSA for efficient gas allocation and utilization in hybrid hydrogen network: Integrating process simulation, modeling, and machine learning

Simultaneously enhancing H2 recovery and CO2 captured pressure during the hydrogen purification process of medium-temperature shifting gas by coupled wet CO2 separation-PSA technology: From laboratory to industrial scale test

Modeling and optimal design of multicomponent vacuum pressure swing adsorber for simultaneous separation of carbon dioxide and hydrogen from industrial waste gas

Design of Refinery Hydrogen Networks with Pressure Swing Adsorption Unit Configuration under Uncertainty: Economy and Flexibility Aspects

Development of Pure Hydrogen Generation System Based on Methanol Steam Reforming and Pd Membrane

Optimization of Small-Scale Hydrogen Production with Membrane Reactors

Advances in Pressure Swing Adsorption for Gas Separation

A Systematic Simulation and Proposed Optimization of the Pressure Swing Adsorption Process for N2/CH4 Separation under External Disturbances