Abstract:Mathematical models of dynamics of pressure swing adsorption processes for the separation of synthesis gas (into hydrogen, carbon dioxide and carbon monoxide) and air (into oxygen, nitrogen and argon) have been developed. The models allow calculating the profiles of component concentrations and temperature of gas and solid phases, pressure and velocity of gas mixture along the height of adsorbent in relation to time. The models include the following equations: 1) processes of mass and heat transfer during the adsorption (desorption) of a sorptive (H2, CO2, COandO2, N2, Ar) by granulated zeolite adsorbents 5Aand13Х; 2) kinetics of compound diffusion transport of adsorbate and Langmuir-Freundlich isotherm (for the synthesis gas separation), kinetics of external diffusion and Dubinin-Radushkevich isotherm (for the air separation); 3) the Ergun equation for the calculation of pressure and velocity of gas mixture in adsorbent.The system of partial differential equations was solved by method of lines. The system of ordinary differential equations was solved by the fourth-order Runge-Kutta method with automatic step selection.To analyze the accuracy of mathematical models of the adsorption separation of synthesis-gas for recovery hydrogen, the relative error of the mismatch between the calculated values for the model and the experimental values of the concentration of the product (hydrogen, oxygen) in the 'steady state' (after 15-30 operating cycles of the PSA) was calculated. The maximum value of the relative error did not exceed 11.5%.Numerical studies were carried out in a wide range of changes in the time of the cycle "adsorption-desorption" and the pressure at the stage of adsorption to determine the effect of changes in temperature, composition and pressure of the initial gas mixture on the purity, recovery and temperature of production hydrogen and oxygen, as well as the relationship of the PSA unit capacity with the purity of the resulting product (hydrogen, oxygen). The problem of adaptive optimization of the process of adsorption separation of a gas mixture and obtaining hydrogen and oxygen with a maximum concentration was formulated and solved.The algorithmic and software of the automated adaptive control system was developed.

A Systematic Simulation and Proposed Optimization of the Pressure Swing Adsorption Process for N2/CH4 Separation under External Disturbances

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Efficient Hybrid Strategy for Simultaneous Design of Refinery Hydrogen Networks and Pressure Swing Adsorption Unit

Dynamic process simulation and optimization of CO2 removal from confined space with pressure and temperature swing adsorption

Vacuum pressure swing adsorption system for N2/CO2 separation in consideration of unstable feed concentration

Nitrogen rejection from low quality natural gas by pressure swing adsorption experiments and simulation using dynamic adsorption isotherms

Simulation of CO2 capture from natural gas by cyclic pressure swing adsorption process using activated carbon

Correlations Between Adsorbent Characteristics and the Performance of Pressure Swing Adsorption Separation Process

Optimization of a Six-Step Pressure Swing Adsorption Process for Biogas Separation on a Commercial Scale

An improved vacuum pressure swing adsorption process with the simulated moving bed operation mode for CH4/N2 separation to produce high-purity methane

Separation of $CH_4/CO_2/N_2$ Mixture by Pressure Swing Adsorption

Multiscale design of a pressure swing adsorption process for natural gas purification

Separation of Methane and Nitrogen Using Heavy Reflux Pressure Swing Adsorption: Experiments and Modeling

Simulation and Energy Consumption Comparison of Gas Purification System Based on Elevated Temperature Pressure Swing Adsorption in Ammonia Synthetic System

CFD Simulation for Separation of Carbon Dioxide-Methane Mixture by Pressure Swing Adsorption

State-of-the-art in Applications of Pressure Swing Adsorption Technology

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Simultaneously enhancing H2 recovery and CO2 captured pressure during the hydrogen purification process of medium-temperature shifting gas by coupled wet CO2 separation-PSA technology: From laboratory to industrial scale test

Design of Refinery Hydrogen Networks with Pressure Swing Adsorption Unit Configuration under Uncertainty: Economy and Flexibility Aspects

A numerical comparison of heavy‐purge and dual‐reflux strategies in pressure swing adsorption for methane enrichment

Problems of analysis, optimization and control in the separation of gas mixtures