Abstract:Purification section of syngas from coal is located after water gas shift to remove hydrogen sulfide, carbon dioxide as the main gas impurities and obtain high purity hydrogen. At present, the mature purification processes include wet method represented by low temperature methanol scrubbing and liquid nitrogen scrubbing, and dry method represented by pressure swing adsorption decarburization. The operating temperature of the elevated temperature pressure swing adsorption technology proposed is consistent with the temperature of the incoming shift gas. Self-made hydrophobic nitrogen-rich activated carbon adsorbent was deployed to achieve desulfurization and carburization by increasing the traditional pressure swing adsorption operating temperature to 170-220 ℃ and high humidity environment. Two new PSA steps, high pressure steam rinse and low pressure nitrogen purge, were adopted to improve H 2 recovery to above 99%. The elevated temperature pressure swing adsorption H 2 /CO 2 separation demonstration with a processing capacity of 5 000 m~3/h（standard condition）was built and operated using coal based shift gas from Quanji Plant as the feedstock for the pilot plant. The purity of hydrogen reaches the hydrogen fuel level（including N 2 ） through two-stage ETPSA, and the pilot plant has been running for more than 2 800 hours in total. In addition, the energy consumption of the pilot plant was calculated based on the utilities expenses. When taking power consumption into consideration, the operation cost of H 2 purification for the pilot test can be significantly reduced by about 35% compared with the power consumption of H 2 purification by low temperature methanol scrubbing at Fengxi Plant. This technology breaks through the limitation of temperature of conventional adsorption and purification for solid adsorbents, and realizes directional removal of impurities in hydrogen by using adsorbents with preferred selective adsorption performance at elevated temperature, which confirms a new process route for efficient and high-quality hydrogen purification.

Simulation and Energy Consumption Comparison of Gas Purification System Based on Elevated Temperature Pressure Swing Adsorption in Ammonia Synthetic System

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Application of Elevated Temperature Pressure Swing Adsorption in Hydrogen Production from Syngas

Two-train Elevated-Temperature Pressure Swing Adsorption for High-Purity Hydrogen Production

Elevated Temperature Pressure Swing Adsorption Process for Reactive Separation of CO/CO2 in H2-rich Gas

Performance Exploration of Temperature Swing Adsorption Technology for Carbon Dioxide Capture

Simultaneously enhancing H2 recovery and CO2 captured pressure during the hydrogen purification process of medium-temperature shifting gas by coupled wet CO2 separation-PSA technology: From laboratory to industrial scale test

Techno-economic Evaluation of an Elevated Temperature Pressure Swing Adsorption Process in A 540 MW IGCC Power Plant with CO2 Capture

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Optimization of a Six-Step Pressure Swing Adsorption Process for Biogas Separation on a Commercial Scale

Study and demonstration of H2/CO2 separation of syngas from coal by elevated temperature pressure swing adsorption

A numerical comparison of heavy‐purge and dual‐reflux strategies in pressure swing adsorption for methane enrichment

Integrated Gasification Combined Cycle with Carbon Dioxide Capture by Elevated Temperature Pressure Swing Adsorption

Simulation of CO2 capture from natural gas by cyclic pressure swing adsorption process using activated carbon

On-site demonstration of an elevated temperature hydrogen clean-up unit for fuel cell applications

A Systematic Simulation and Proposed Optimization of the Pressure Swing Adsorption Process for N2/CH4 Separation under External Disturbances

Hydrogen Purification Performance of Pressure Swing Adsorption Based on Cu-BTC/zeolite 5A Layered Bed

Purification of helium from a cryogenic natural gas nitrogen rejection unit by pressure swing adsorption

Correlations Between Adsorbent Characteristics and the Performance of Pressure Swing Adsorption Separation Process

Elevated Temperature Pressure Swing Adsorption Using LaNi4.3Al0.7 for Efficient Hydrogen Separation

Adsorbent Characteristic Regulation and Performance Optimization for Pressure Swing Adsorption Via Temperature Elevation