Abstract:Pressure swing adsorption (PSA) appears to be an effective technology for biogas upgrading under different operating conditions with low greenhouse gas emissions. This study presents the simulation of biomethane adsorption with the adsorption bed filled with a carbon molecular sieve (CMS). A six dual-bed six-step PSA process was studied which produced a high purity of biomethane. The design of the adsorption bed was followed by the real process of which the biomethane capacity was more than 5000 Nm3/h. For the adsorbent, a CMS-3K was used, and a biomethane gas with a minimum 92% purity was produced at 6.5 bar adsorption pressure. To understand the adsorption characteristics of the CH4 and CO2 gases, the Langmuir isotherm model was used to determine the isotherm of a mixed gas containing 55% CH4 and 45% CO2. Furthermore, the experimental data from the work of Cavenati et al. were used to investigate the kinetic parameter and mass transfer coefficient. The mass transfer coefficients of two species were determined to be 0.0008 s−1 and 0.018 s−1 at 306 K for CH4 and CO2, respectively. The PSA process was then simulated with a cyclic steady state until the relative tolerance was 0.0005, which was then used to predict the CH4 and CO2 mole fraction along the adsorption bed length at a steady state. Moreover, the optimal conditions were analyzed using Aspen Adsorption to simulate various key operating parameters, such as flowrate, adsorption pressure and adsorption time. The results show a good agreement between the simulated results and the real operating data obtained from the company REBiofuel. Finally, the sensitivity analysis for the major parameters was presented. The optimal conditions were found to be an adsorption pressure of 6 bar, an adsorption time of 250 s and a purity of up to 97.92% with a flowrate reducing to 2000 Nm3/h. This study can serve as a commercial approach to reduce operating costs.

Simulation of CO2 capture from natural gas by cyclic pressure swing adsorption process using activated carbon

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Performance Exploration of Temperature Swing Adsorption Technology for Carbon Dioxide Capture

Post-combustion CO2 capture from a natural gas combined cycle power plant using activated carbon adsorption

Mechanism Modeling of Elevated Temperature Pressure Swing Adsorption Process for Pre-Combustion Co2 Capture

CFD Simulation for Separation of Carbon Dioxide-Methane Mixture by Pressure Swing Adsorption

Multiscale design of a pressure swing adsorption process for natural gas purification

System And Processes Of Pre-Combustion Carbon Dioxide Capture And Separation

Optimization of a Six-Step Pressure Swing Adsorption Process for Biogas Separation on a Commercial Scale

Integrated Gasification Combined Cycle with Carbon Dioxide Capture by Elevated Temperature Pressure Swing Adsorption

Techno-economic Evaluation of an Elevated Temperature Pressure Swing Adsorption Process in A 540 MW IGCC Power Plant with CO2 Capture

Pressure Swing Adsorption for Biogas Upgrading with Carbon Molecular Sieve

Experimental Characterization and Mechanistic Simulation of CO2 Adsorption/Desorption Processes for Potassium Promoted Hydrotalcites Sorbent

Dynamic process simulation and optimization of CO2 removal from confined space with pressure and temperature swing adsorption

Efficient CO 2 /CO Separation by Pressure Swing Adsorption Using an Intrinsically Nanoporous Molecular Crystal

A Systematic Simulation and Proposed Optimization of the Pressure Swing Adsorption Process for N2/CH4 Separation under External Disturbances

Separation of $CH_4/CO_2/N_2$ Mixture by Pressure Swing Adsorption

Correlations Between Adsorbent Characteristics and the Performance of Pressure Swing Adsorption Separation Process

Simulation of Capturing Carbon Dioxide from Flue Gas by Activated Carbon

Thermodynamic Study on Two Adsorption Working Cycles for Direct Air Capture