Abstract:CO2 separation for natural gas purification by the adsorption method was studied in detail using volumetric adsorption apparatus. The crystalline phase and microstructure of the experimental sample were analyzed using X-ray diffraction (XRD), scanning electron microscopy (SEM) and Micromeritics ASAP 2020 instrument. The XRD pattern proves that the experimental sample consists of 13X zeolites. The SEM images show that the 13X zeolites expose a large number of micro-channels on the surface of the particles. The microporous volume is 0.22cm3(STP)/g. The ideal swing frequency for the adsorption tank can improve the adsorption performance of an adsorbent compared with a static adsorption tank. The pure CO2 adsorption experimental data agrees well with the extended Langmuir model. The Langmuir-Freundlich model correlates the CO2/CH4 mixture adsorption experimental data fairly well. The relative errors between the simulated results and the experimental data are very little, which indicates that these fitted models are correct. The average selectivity of CO2/CH4 in a static and swing adsorption tank are, respectively, 3.57 and 3.93, considerably higher than 1, indicating preferential CO2 adsorption over CH4 in CO2/CH4 mixtures. This also shows that the swing can improve CO2 separation for natural gas purification. For the three types of motion status, the temperature of the adsorption tank increased in the order swing 2>swing1>static state for pure CO2 adsorption in 13X zeolites. The temperature variation decreased as the pressure increased. The amplitude and time of temperature variations in the adsorption tank can explain the adsorption capacity and adsorption speed. This research will improve the efficiency of offshore natural gas exploitation, and will affect the optimization of energy structures.

Efficient CO 2 /CO Separation by Pressure Swing Adsorption Using an Intrinsically Nanoporous Molecular Crystal

Thermodynamic–Kinetic Synergistic Separation for O 2 /N 2 and CO 2 /CH 4 on Nanoporous Carbon Molecular Sieves

Simulation of CO2 capture from natural gas by cyclic pressure swing adsorption process using activated carbon

Separation of $CH_4/CO_2/N_2$ Mixture by Pressure Swing Adsorption

Efficient Capture of CO2 over Ordered Micro-Mesoporous Hybrid Carbon Nanosphere

Carbon monoxide isotope enrichment and separation by pressure swing adsorption

Functionalized linker to form high-symmetry adsorption sites in micropore COF for CO2 capture and separation: insight from GCMC simulations

CO2 Adsorption and Separation from Natural Gason Phosphorene Surface: Combining DFT and GCMC Calculations

Benchmark CO2 separation achieved by highly fluorinated nanoporous molecular sieve membranes from nonporous precursor via in situ cross-linking

Pore Space Partitioning MIL-88(Co): Developing Robust Adsorbents for CO2/CH4 Separation Featured with High CO2 Adsorption and Rapid Desorption

Correlations Between Adsorbent Characteristics and the Performance of Pressure Swing Adsorption Separation Process

Experimental investigation of CO2 separation by adsorption methods in natural gas purification

System And Processes Of Pre-Combustion Carbon Dioxide Capture And Separation

Advances in Post‐Combustion CO 2 Capture by Physical Adsorption: From Materials Innovation to Separation Practice

Thermodynamic and kinetic synergetic separation of CO2/C2H2 in an ultramicroporous metal-organic framework

Multi-bed Vacuum Pressure Swing Adsorption for Carbon Dioxide Capture from Flue Gas

Preparation of high pure carbon monoxide by pressure swing adsorption

Efficient inverse CO2/C2H2 separation driven by rare thermodynamic affinities difference in a porous MOF

Nanoconfinement-driven energy-efficient CO2 capture and release at high pressures on a unique large-pore mesoporous carbon

A low cost and energy consumption Ultra-microporous CPM-20(Co) for CO2/N2 and CO2/CH4 separation