Abstract:The separation of a natural gas mixture containing 85 mol% CH4 and 15 mol% N2 by dual reflux pressure swing adsorption (DR PSA) was investigated using dynamic non-isothermal numerical simulations previously benchmarked against experiments. Two different adsorbents were employed: a commercially available activated carbon (AC1) and the recently developed ionic liquidic zeolite (ILZ), which has about twice the selectivity for methane over nitrogen than the activated carbon. Four DR PSA cycle configurations (PL-A, PH-A, PL-B and PH-B) were studied and iteratively optimized in terms of separation performance and energy consumption. The dynamic non-isothermal simulations, implemented in the software platform Aspen Adsorption, included a polytropic compressor model with temperature dependent heat capacities for more realistic predictions of the compressor duty. The heavy product to feed ratio, the feed step time and the light reflux ratio were selected as key optimization parameters for all four cycles at fixed bed pressure ratio, feed location and feed flow rate. The simulations showed that A-cycles were superior to B-cycles in terms of their separation performance for both adsorbent materials. Overall, the separation performance achieved by AC1 was lower than that by ILZ. At optimized conditions for AC1, PL-A and PH-A cycles achieved approximately 92 mol% CH4 in the heavy product and 4.5 mol% CH4 in the light product with corresponding energy requirement at 9.9 kJ mol−1 (feed) and 8.7 kJ mol−1 (feed), while using the ILZ adsorbent, both PL-A and PH-A cycles were able to deliver 0.9 mol% CH4 in the light product and 93.5 mol% CH4 in the heavy product. The cycle work of the PL-A and PH-A configuration using ILZ was 8.8 and 7.7 kJ mol−1 (feed), respectively. These simulation results show that DR PSA processes using ionic liquidic zeolites can meet strict natural gas separation requirements and that such processes can efficiently upgrade sub-quality natural gas.

Carbon monoxide isotope enrichment and separation by pressure swing adsorption

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Separation of Methane and Nitrogen Using Heavy Reflux Pressure Swing Adsorption: Experiments and Modeling

Efficient CO 2 /CO Separation by Pressure Swing Adsorption Using an Intrinsically Nanoporous Molecular Crystal

Preparation of high pure carbon monoxide by pressure swing adsorption

Pilot-scale Experiment for Purification of CO from Industrial Tail Gases by Pressure Swing Adsorption

Separation of $CH_4/CO_2/N_2$ Mixture by Pressure Swing Adsorption

A numerical comparison of heavy‐purge and dual‐reflux strategies in pressure swing adsorption for methane enrichment

Pressure Swing Adsorption for Biogas Upgrading with Carbon Molecular Sieve

Correlations Between Adsorbent Characteristics and the Performance of Pressure Swing Adsorption Separation Process

Simulation of CO2 capture from natural gas by cyclic pressure swing adsorption process using activated carbon

Nitrogen rejection from natural gas by dual reflux-pressure swing adsorption using activated carbon and ionic liquidic zeolite

Elevated Temperature Pressure Swing Adsorption Process for Reactive Separation of CO/CO2 in H2-rich Gas

Optimization of a Six-Step Pressure Swing Adsorption Process for Biogas Separation on a Commercial Scale

Multiscale design of a pressure swing adsorption process for natural gas purification

[Recovery of CO from an Ammonia Plant Tail Gas with Pressure Swing Adsorption Process].

CO2 capture by modified clinoptilolite and its regeneration performance

Separation of Methane–Nitrogen Mixture by Pressure Swing Adsorption for Natural Gas Upgrading

Evaluation of carbon dioxide–nitrogen separation through fixed bed measurements and simulations

PSA separation of CH 4/N 2 mixture with carbon molecular sieve

System And Processes Of Pre-Combustion Carbon Dioxide Capture And Separation