Abstract:Adsorption is an appealing technology for the removing of CO 2 from natural gas because it can handle high CO 2 concentrations at high pressures. The determination of mono-component breakthrough curves provides heat and mass transfer parameters to assess separation effectiveness that can be used for simulation of swing adsorption separation processes (PSA, TSA etc.). However, in lab-scale fixed-bed adsorption, it may be challenging to perform this assessment due to low flow conditions that are usually employed, affecting the flow regimedepending on the operation conditions. In this sense, this work aimed to evaluate the effect of flow regime configurations and difference in gases densities by means of residence time distribution (RTD) analysis in the PSA of CO 2 in a NaY zeolite fixed bed , in order to to collect information that satisfy pipeline specifications in industrial applications. A high-pressure lab-scale apparatus was used with NaY particles of 0.7250 mm mean diameter, a 10.5 cm bed height , and a tubular column of 2.0 cm internal diameter. The upward and downward flows were conducted under 528.82 ± 4.59 NmL min −1 inlet mass flow rate, 51 bar, and 30 °C. The RTD analysis was performed to verify the flow regime, and mass transfer zone (MTZ) length was estimated. It was observed that downward flow conditions promoted higher concentration spread than upward flow. RTD analysis showed that downward flow is dominated by laminar convection while the upward flow is dominated by dispersion. MTZ length increased from 0.64 cm in upward flow to 5.81 cm in downward flow. Therefore, assessing CO 2 flow conditions and, additionally, the difference in gases densities, are important steps that should be taken when dealing with fluid adsorption under high pressure because different densities between fluid components severely changed and affected flow regime and, consequently, separation effectiveness.

Comparison of upward and downward flow in high-pressure bulk CO 2 gas adsorption on NaY zeolite fixed bed

Mass Transfer Process of Co2 Absorption Through Non-Porous Hollow Fibre Contactor

Evaluation of carbon dioxide–nitrogen separation through fixed bed measurements and simulations

Adsorption-absorption technique for effective CO2 capture

Adsorption and Desorption of Carbon Dioxide and Nitrogen on Zeolite 5A

Experimental investigation of CO2 separation by adsorption methods in natural gas purification

Breakthrough analysis of continuous fixed-bed dehydration of gas streams using 4A zeolite molecular sieve

Synthesis of NaY Zeolite and their CO<sub>2</sub> Adsorption Properties

Screening Zeolites for Gas Separation Applications Involving Methane, Nitrogen, and Carbon Dioxide

Performance Evaluation of Static and Dynamic CO2 Adsorption from Synthetic Gas Condensates Using Zinc Oxide, Silicon Dioxide and Zeolite 13X

Pressure Swing Adsorption for Biogas Upgrading with Carbon Molecular Sieve

The impact of trace amounts of CO2 on the high-pressure adsorption of CH4 on 5A zeolite

Comparative analysis of CO 2 and N 2 adsorption on zeolite 4A: Thermodynamics parameters and site energy distribution investigations

Adsorption Equilibrium of CO2, CH4 and N2 on Zeolite 13X-APG

Simulation of high-pressure sour natural gas adsorption equilibrium on NaX and NaY zeolites using the multicomponent potential theory of adsorption

High-pressure adsorption of H2S, CO2 and CH4 on porous aromatic framework (PAF-30) at different temperatures

Multiscale design of a pressure swing adsorption process for natural gas purification

Using Molecular Simulations for Elucidation of Thermodynamic Nonidealities in Adsorption of CO2-Containing Mixtures in NaX Zeolite

Improvement of Temperature Profiles Using Variable Heat of Adsorption in Modeling H 2 /CO 2 Breakthrough Experiments

Adsorption of CO 2 and N 2 on Synthesized NaY Zeolite at High Temperatures

Zeolite Apgiia for Adsorption Based Carbon Dioxide Capture