Abstract:The separation of methane (CH 4 ) from industrially–important nitrogen (N 2 )-rich vent streams such as those in liquefied natural gas processing plants is challenging. Pressure swing adsorption (PSA) is a promising, cost–effective solution in gas separation, especially for small–scale units. Further development and commercialisation of PSA–based technologies requires access to low–cost, selective adsorbent materials. The current work investigates the improved separation of CH 4 from N 2 by TMA–Y zeolite which is obtained from the ion exchange treatment of Na–Y zeolite with the ammonium salt tetramethylammonium chloride (TMACl). TMA–Y is commercially called Ionic Liquidic Zeolite (ILZ), patented at The University of Western Australia, and has now been demonstrated in tonne–scale. In particular, we use a combination of experimental and molecular simulation techniques to provide insights into the high CH 4 –over–N 2 selectivity of TMA–Y. For this, we obtain equilibrium isotherms of CH 4 and N 2 on Na–Y at different temperatures and pressures before and after ion exchange. The true selectivities of the zeolite samples are determined using the Ideal Adsorbed Solution Theory (IAST) and binary–gas grand–canonical Monte Carlo (GCMC) molecular simulations. From experiments and IAST calculations, we report an increase of > 110 % in the CH 4 /N 2 selectivity of Na–Y after treatment with TMACl (from 2.2 to 4.7 at 5.0 MPa and 303.15 K for a mixture of 0.1 CH 4 + 0.9 N 2 mol.mol −1 ). GCMC molecular simulations provide a detailed picture of the molecular origins of this effect. Specifically, the introduction of TMA + ions into the structure of Na–Y zeolite leads to a reduction of the available adsorption volume more than 40 % (from 0.30 to 0.17 cm 3 .g −1 with N 2 as the probe molecule) for both adsorbing gas species (i.e. CH 4 and N 2 ). However, at the same time, this leads to stronger CH 4 –cation interactions due to much higher affinity of TMA + cations (5 kJ.mol −1 ) than extra–framework Na + cations (1 kJ.mol −1 ) towards CH 4 . The overall effect of these two trends combined is the higher selectivity of the resulting TMA–Y zeolite for CH 4 . These molecular insights are useful in the systematic engineering of new materials with improved separation performance.

Screening Zeolites for Gas Separation Applications Involving Methane, Nitrogen, and Carbon Dioxide

Ab Initio Screening of Divalent Cations for CH4, CO2, H2, and N2 Separations in Chabazite Zeolite

Separating nitrogen/methane on zeolite-like molecular sieves

Screening of Alkali Metal-Exchanged Zeolites for Nitrogen/Methane Separation

Experimental investigation of CO2 separation by adsorption methods in natural gas purification

Adsorption of Gases on a Carbon Molecular Sieve Used for Air Separation: Linear Adsorptives as Probes for Kinetic Selectivity

Separation of methane and nitrogen using ionic liquidic zeolites by pressure vacuum swing adsorption

Nitrogen Rejection from Methane via a “Trapdoor” K-ZSM-25 Zeolite

Adsorption of CO2, CH4, N2O, and N2 on MOF-5, MOF-177, and Zeolite 5A

Precise pore size modulation of K-MER zeolites for N2 trapping

Application of natural zeolites in the purification and separation of gases

Fine Control of Zeolite Pore-opening Size and Gas Separation

Nitrogen rejection in natural gas using NaZSM-25 zeolite

Adsorption separation of carbon dioxide, methane and nitrogen on monoethanol amine modified β-zeolite

Molecular Simulation of Adsorption and Separation of Binary Mixtures for Short Linear Alkanes in Zeolite

Static and Dynamic Simulation of Single and Binary Component Adsorption of CO2 and CH4 on Fixed Bed Using Molecular Sieve of Zeolite 4A

Nitrogen rejection from natural gas by dual reflux-pressure swing adsorption using activated carbon and ionic liquidic zeolite

Improving separation of CH 4 and N 2 by adsorption on zeolite Y Ion–Exchanged with ammonium Cations: An experimental and Grand–Canonical Monte Carlo (GCMC) simulation investigation

Adsorption Equilibria of CO2, CH4, N2, O2, and Ar on High Silica Zeolites

Ammonia Adsorption at High Temperature and Pressure using Sodium Containing Aluminosilicates: Selectivity over Nitrogen and Multicycle Working Capacities

Novel zeolite/carbon monolith adsorbents for efficient CH4/N2 separation