Abstract:Industrial hydrogen-rich waste streams hold promises in their upgrading to feed fuel cell stacks. As in the ammonia synthesis process, a stream of up to 180–240 Nm3 per ton of ammonia is purged to keep the inert gases concentration below a threshold value; this stream contains large hydrogen quantities, which could be recovered. In the current work, a four-column PSA unit has been used to produce a high-purity hydrogen stream for fuel cell applications from a synthetic mixture with a molar composition of 58% H2, 25% N2, 15% CH4 and 2% Ar, based on ammonia purge gas. Firstly, a comparative performance of four commercially adsorbents was accomplished to obtain the adsorption isotherms of H2, N2, CH4, and Ar, leading to the selection of 5A zeolite adsorbent. Then, the dynamic behavior of a packed bed was studied by single and multicomponent breakthrough experiments and simulated using Aspen Adsorption®. The results, simulations and experimental, indicate that after H2 the first impurity to break thought the column is Ar, followed by N2 and finally by CH4. Then, a design-of-experiments (DoE) methodology was used to select the best operating conditions of the experimental cyclic PSA unit to reach different target hydrogen product concentrations; the overall PSA performance was evaluated in terms of purity and recovery of H2 product. According to the results, the four-column PSA unit running at 9 bar produced a stream with hydrogen concentration of 99.25% and 99.97% of H2, with a recovery of 75.3% and 55.5%, respectively, where the impurities were mostly Ar and N2. In addition to the technical performance, the economic assessment concluded that the cost to compress, transport and purify waste hydrogen to a concentration of 99.97% using a small-scale PSA unit from ammonia plants has been estimated in the range of 1.17–1.39 € kg H2−1, depending on the dispensing pressure of 350 or 700 bar, respectively. These assessments offer a cost-effective solution to produce high-purity H2 as low cost transportation, allowing hydrogen penetration into the mass markets.

Green Hydrogen Recovery from Natural Gas Grids by Vacuum Pressure Swing Adsorption

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Reconfiguration of Acid Gas Removal Process Matching the Integration of Coal Chemical Industry with Green Hydrogen

Multiscale design of a pressure swing adsorption process for natural gas purification

Adsorption for efficient low carbon hydrogen production: part 2—Cyclic experiments and model predictions

An improved vacuum pressure swing adsorption process with the simulated moving bed operation mode for CH4/N2 separation to produce high-purity methane

Modeling and optimal design of multicomponent vacuum pressure swing adsorber for simultaneous separation of carbon dioxide and hydrogen from industrial waste gas

Biomethane production by adsorption technology: new cycle development, adsorbent selection and process optimization

Elevated Temperature Pressure Swing Adsorption Process for Reactive Separation of CO/CO2 in H2-rich Gas

Application of Elevated Temperature Pressure Swing Adsorption in Hydrogen Production from Syngas

Advances in Pressure Swing Adsorption for Gas Separation

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Study and demonstration of H2/CO2 separation of syngas from coal by elevated temperature pressure swing adsorption

Green route for biomethane and hydrogen production via integration of biogas upgrading using pressure swing adsorption and steam-methane reforming process

Recent Advances in Elevated-Temperature Pressure Swing Adsorption for Carbon Capture and Hydrogen Production

Elevated Temperature Pressure Swing Adsorption Using LaNi4.3Al0.7 for Efficient Hydrogen Separation

Two-train Elevated-Temperature Pressure Swing Adsorption for High-Purity Hydrogen Production

An innovative gas management methodology based on PSA for efficient gas allocation and utilization in hybrid hydrogen network: Integrating process simulation, modeling, and machine learning

PSA purification of waste hydrogen from ammonia plants to fuel cell grade

Simultaneously enhancing H2 recovery and CO2 captured pressure during the hydrogen purification process of medium-temperature shifting gas by coupled wet CO2 separation-PSA technology: From laboratory to industrial scale test

Simulation of a sorption-enhanced water gas-shift pilot technology for pure hydrogen production from a waste gasification plant