Abstract:The separation of a natural gas mixture containing 85 mol% CH4 and 15 mol% N2 by dual reflux pressure swing adsorption (DR PSA) was investigated using dynamic non-isothermal numerical simulations previously benchmarked against experiments. Two different adsorbents were employed: a commercially available activated carbon (AC1) and the recently developed ionic liquidic zeolite (ILZ), which has about twice the selectivity for methane over nitrogen than the activated carbon. Four DR PSA cycle configurations (PL-A, PH-A, PL-B and PH-B) were studied and iteratively optimized in terms of separation performance and energy consumption. The dynamic non-isothermal simulations, implemented in the software platform Aspen Adsorption, included a polytropic compressor model with temperature dependent heat capacities for more realistic predictions of the compressor duty. The heavy product to feed ratio, the feed step time and the light reflux ratio were selected as key optimization parameters for all four cycles at fixed bed pressure ratio, feed location and feed flow rate. The simulations showed that A-cycles were superior to B-cycles in terms of their separation performance for both adsorbent materials. Overall, the separation performance achieved by AC1 was lower than that by ILZ. At optimized conditions for AC1, PL-A and PH-A cycles achieved approximately 92 mol% CH4 in the heavy product and 4.5 mol% CH4 in the light product with corresponding energy requirement at 9.9 kJ mol−1 (feed) and 8.7 kJ mol−1 (feed), while using the ILZ adsorbent, both PL-A and PH-A cycles were able to deliver 0.9 mol% CH4 in the light product and 93.5 mol% CH4 in the heavy product. The cycle work of the PL-A and PH-A configuration using ILZ was 8.8 and 7.7 kJ mol−1 (feed), respectively. These simulation results show that DR PSA processes using ionic liquidic zeolites can meet strict natural gas separation requirements and that such processes can efficiently upgrade sub-quality natural gas.

Application analysis of layered pressure swing adsorption method for offshore floating natural gas purification

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Fabrication of wall-flow honeycomb micro packed bed and application in pressure swing adsorption process

Multiscale design of a pressure swing adsorption process for natural gas purification

Nitrogen rejection from low quality natural gas by pressure swing adsorption experiments and simulation using dynamic adsorption isotherms

Simulation of CO2 capture from natural gas by cyclic pressure swing adsorption process using activated carbon

Separation of $CH_4/CO_2/N_2$ Mixture by Pressure Swing Adsorption

Optimization of a Six-Step Pressure Swing Adsorption Process for Biogas Separation on a Commercial Scale

An improved vacuum pressure swing adsorption process with the simulated moving bed operation mode for CH4/N2 separation to produce high-purity methane

Nitrogen rejection from natural gas by dual reflux-pressure swing adsorption using activated carbon and ionic liquidic zeolite

Experimental investigation of CO2 separation by adsorption methods in natural gas purification

A numerical comparison of heavy‐purge and dual‐reflux strategies in pressure swing adsorption for methane enrichment

Separation of Methane and Nitrogen Using Heavy Reflux Pressure Swing Adsorption: Experiments and Modeling

Methane/nitrogen separation through pressure swing adsorption process from nitrogen-rich streams

Simulation and Energy Consumption Comparison of Gas Purification System Based on Elevated Temperature Pressure Swing Adsorption in Ammonia Synthetic System

Hydrogen Purification Performance of Pressure Swing Adsorption Based on Cu-BTC/zeolite 5A Layered Bed

Separation of Methane–Nitrogen Mixture by Pressure Swing Adsorption for Natural Gas Upgrading

State-of-the-art in Applications of Pressure Swing Adsorption Technology

Small-scale Experiment on Pressure Swing Adsorption of LFG

Feasibility of Temperature Swing Adsorption in Adsorbent-Coated Microchannels for Natural Gas Purification

Advances in Pressure Swing Adsorption for Gas Separation