Abstract:Pressure swing adsorption (PSA) appears to be an effective technology for biogas upgrading under different operating conditions with low greenhouse gas emissions. This study presents the simulation of biomethane adsorption with the adsorption bed filled with a carbon molecular sieve (CMS). A six dual-bed six-step PSA process was studied which produced a high purity of biomethane. The design of the adsorption bed was followed by the real process of which the biomethane capacity was more than 5000 Nm3/h. For the adsorbent, a CMS-3K was used, and a biomethane gas with a minimum 92% purity was produced at 6.5 bar adsorption pressure. To understand the adsorption characteristics of the CH4 and CO2 gases, the Langmuir isotherm model was used to determine the isotherm of a mixed gas containing 55% CH4 and 45% CO2. Furthermore, the experimental data from the work of Cavenati et al. were used to investigate the kinetic parameter and mass transfer coefficient. The mass transfer coefficients of two species were determined to be 0.0008 s−1 and 0.018 s−1 at 306 K for CH4 and CO2, respectively. The PSA process was then simulated with a cyclic steady state until the relative tolerance was 0.0005, which was then used to predict the CH4 and CO2 mole fraction along the adsorption bed length at a steady state. Moreover, the optimal conditions were analyzed using Aspen Adsorption to simulate various key operating parameters, such as flowrate, adsorption pressure and adsorption time. The results show a good agreement between the simulated results and the real operating data obtained from the company REBiofuel. Finally, the sensitivity analysis for the major parameters was presented. The optimal conditions were found to be an adsorption pressure of 6 bar, an adsorption time of 250 s and a purity of up to 97.92% with a flowrate reducing to 2000 Nm3/h. This study can serve as a commercial approach to reduce operating costs.

Small-scale Experiment on Pressure Swing Adsorption of LFG

Modelling and Simulation of Two-Bed PSA Process for Separating H2 from Methane Steam Reforming

Removal technologies of carbon dioxide in landfill gas and its research advances

Bioenergy recovery from landfill gas: A case study in China

Pilot-scale Experiment for Purification of CO from Industrial Tail Gases by Pressure Swing Adsorption

Influences of Leachate Level on Landfill Gas Collection

Production of green methane by carbon dioxide capture from landfill biogas via pressure swing adsorption mediated by MOF ZIF-8

APPLITICATION OF MODELS FOR ESTIMATING LANDFILL GAS GENERATION IN CHINA

Effect of volatile organic compounds on carbon dioxide adsorption performance via pressure swing adsorption for landfill gas upgrading

Purifying Technique of Landfill Gas

Integrated design of multi-stage membrane separation for landfill gas with uncertain feed

State-of-the-art in Applications of Pressure Swing Adsorption Technology

Simulation and experiment for the pressure swing adsorption separation of methane and nitrogen

Separation of Methane and Nitrogen Using Heavy Reflux Pressure Swing Adsorption: Experiments and Modeling

Landfilling of Pretreated Municipal Solid Waste by Natural Convection of Air and Its Effects

Application analysis of layered pressure swing adsorption method for offshore floating natural gas purification

A Systematic Simulation and Proposed Optimization of the Pressure Swing Adsorption Process for N2/CH4 Separation under External Disturbances

Thermodynamic Exploration of Two-Stage Vacuum-Pressure Swing Adsorption for Carbon Dioxide Capture

Exploration on efficient collection of landfill gas in a landfill with a high leachate level

Optimization of a Six-Step Pressure Swing Adsorption Process for Biogas Separation on a Commercial Scale

Simulation of CO2 capture from natural gas by cyclic pressure swing adsorption process using activated carbon