Abstract:We present an efficient power management system (PMS) to harvest energy from thermoelectric energy generators (TEGs) via indirect temperature tracking. The PMS includes a power converter with an indirect temperature-dependent (ITD) maximum power point tracking (MPPT) controller and two complementary self-startups. The ITD-MPPT controller consists of an ITD input sampling circuit (ITD-ISC) and an ITD impedance matching circuit (ITD-IMC). The ITD-ISC detects and samples the TEG voltage ( V TEG ) under dynamically varying temperature gradients. The ITD-ISC removes unnecessary detachments of the converter from multi-mode reconfigurable TEGs to recover the otherwise wasted power using an adaptive input sampling (AIS) technique. The ITD-IMC adjusts the on-time of the power switch to control the input impedance ( R IN ) of the converter with a relatively high resolution of 4.13 mΩ/°C. This approach provides an ultrawide range source tracking from 2 Ω to 200 Ω. We also present a precision zero current switching (ZCS) controller to manage the on-time of the two power switches simultaneously. Two complementary self-startup components are realized using transformer-based (TSC) and charge-pump-based startup circuits (CSC). Integrated circuits for the PMS are fabricated using 180 nm and 28 nm CMOS processes for high efficiency and low voltage, respectively. The measurements indicate that the proposed PMS achieves an end-to-end efficiency ( η EE ) above 80% over a wide source V TEG range (100 mV – 450 mV). The peak η EE of 85.6% is achieved for V TEG = 200 mV, demonstrating the high-performance MPPT using indirect temperature tracking. TSC and CSC demonstrate successful self-startups at input voltages of 38 mV and 200 mV, respectively, thus providing reliable startup methods for various renewable energy sources.

Low Voltage and Low Power Self-Startup Oscillator-Driven Boost Converter for Thermoelectric Generator Operating at Low Temperature

Step-Up DC-DC Converter Supplied by a Thermoelectric Generator for IoT Applications

A 3.5 mV Input Single-Inductor Self-Starting Boost Converter with Loss-Aware MPPT for Efficient Autonomous Body-Heat Energy Harvesting

A Dickson Hybrid Boost Converter With On-Chip Cold-Start for Thermoelectric Energy Harvesting.

A Compact Dickson Hybrid Boost Converter with 5-Mv Input 90.5% Peak Efficiency and On-Chip Cold-Start for Thermoelectric Energy Harvesting

A High Efficiency Step-Up DC-DC Converter for Thermoelectric Generator with Wide Input Voltage Range

A 10 mV-500 mV Input Range, 91.4% Peak Efficiency Adaptive Multi-Mode Boost Converter for Thermoelectric Energy Harvesting

An efficient boost converter control for thermoelectric energy harvesting

A High-Efficiency Dual-Polarity Thermoelectric Energy-Harvesting Interface Circuit With Cold Startup and Fast-Searching ZCD

27.1 An 84% Peak Efficiency Bipolar-Input Boost/Flyback Hybrid Converter With MPPT and on-Chip Cold Starter for Thermoelectric Energy Harvesting

A fully integrated 28nm CMOS dual source adaptive thermoelectric and RF energy harvesting circuit with 110mv startup voltage

A High Efficiency Boost-Buck Converter with Coupled Inductor for Thermoelectric Generator

A Bipolar-Input Thermoelectric Energy-Harvesting Interface with Boost/Flyback Hybrid Converter and On-Chip Cold Starter

A Thermoelectric Energy Harvesting System Assisted by A Piezoelectric Transducer Achieving 10-mV Cold-Startup and 82.7% Peak Efficiency

A TEG Efficiency Booster with Buck–Boost Conversion

Design and analysis of thermoelectric energy harvester with 85.6% peak end-to-end efficiency and 38 mV self-startup using 4.13 mΩ/°C indirect temperature dependent MPPT

Integrated Cold-Start of a Boost Converter at 54mv Using a Two-Stage Capacitive Voltage Multiplier

A Low-Power Thermoelectric Power Generation System Based on a Periodic Thermoelectric Power Generation Method in the Form of Heat Pulses

An On-Chip Transformer-Based Self-Startup Hybrid SIDITO Converter for Thermoelectric Energy Harvesting

30–300mV input, ultra-low power, self-startup DC-DC boost converter for energy harvesting system

A Bipolar-Input Bipolar-Output Dc-Dc Converter For Thermoelectric Energy Harvesting