Abstract:We present an efficient power management system (PMS) to harvest energy from thermoelectric energy generators (TEGs) via indirect temperature tracking. The PMS includes a power converter with an indirect temperature-dependent (ITD) maximum power point tracking (MPPT) controller and two complementary self-startups. The ITD-MPPT controller consists of an ITD input sampling circuit (ITD-ISC) and an ITD impedance matching circuit (ITD-IMC). The ITD-ISC detects and samples the TEG voltage ( V TEG ) under dynamically varying temperature gradients. The ITD-ISC removes unnecessary detachments of the converter from multi-mode reconfigurable TEGs to recover the otherwise wasted power using an adaptive input sampling (AIS) technique. The ITD-IMC adjusts the on-time of the power switch to control the input impedance ( R IN ) of the converter with a relatively high resolution of 4.13 mΩ/°C. This approach provides an ultrawide range source tracking from 2 Ω to 200 Ω. We also present a precision zero current switching (ZCS) controller to manage the on-time of the two power switches simultaneously. Two complementary self-startup components are realized using transformer-based (TSC) and charge-pump-based startup circuits (CSC). Integrated circuits for the PMS are fabricated using 180 nm and 28 nm CMOS processes for high efficiency and low voltage, respectively. The measurements indicate that the proposed PMS achieves an end-to-end efficiency ( η EE ) above 80% over a wide source V TEG range (100 mV – 450 mV). The peak η EE of 85.6% is achieved for V TEG = 200 mV, demonstrating the high-performance MPPT using indirect temperature tracking. TSC and CSC demonstrate successful self-startups at input voltages of 38 mV and 200 mV, respectively, thus providing reliable startup methods for various renewable energy sources.

27.1 An 84% Peak Efficiency Bipolar-Input Boost/Flyback Hybrid Converter With MPPT and on-Chip Cold Starter for Thermoelectric Energy Harvesting

A Bipolar-Input Thermoelectric Energy-Harvesting Interface with Boost/Flyback Hybrid Converter and On-Chip Cold Starter

A Dickson Hybrid Boost Converter With On-Chip Cold-Start for Thermoelectric Energy Harvesting.

A Compact Dickson Hybrid Boost Converter with 5-Mv Input 90.5% Peak Efficiency and On-Chip Cold-Start for Thermoelectric Energy Harvesting

A Bipolar-Input Bipolar-Output Dc-Dc Converter For Thermoelectric Energy Harvesting

A High-Efficiency Dual-Polarity Thermoelectric Energy-Harvesting Interface Circuit With Cold Startup and Fast-Searching ZCD

A 3.5 mV Input Single-Inductor Self-Starting Boost Converter with Loss-Aware MPPT for Efficient Autonomous Body-Heat Energy Harvesting

Parametric Characteristics and Optimization of a Novel Near-Field Thermophotovoltaic and Thermoelectric Hybrid System for Energy Harvest

A TEG Efficiency Booster with Buck–Boost Conversion

Design and analysis of thermoelectric energy harvester with 85.6% peak end-to-end efficiency and 38 mV self-startup using 4.13 mΩ/°C indirect temperature dependent MPPT

A 20-300mV transformer-based self-startup flyback converter with MPPT and ZCS control for thermoelectric energy harvesting

A 10 mV-500 mV Input Range, 91.4% Peak Efficiency Adaptive Multi-Mode Boost Converter for Thermoelectric Energy Harvesting

A Thermoelectric Energy Harvesting System Assisted by A Piezoelectric Transducer Achieving 10-mV Cold-Startup and 82.7% Peak Efficiency

A High Efficiency Step-Up DC-DC Converter for Thermoelectric Generator with Wide Input Voltage Range

A Series Compensated Buck-Boost Converter-Based Thermoelectric Energy Harvesting System with Sliding Mode Controller

High-efficiency photovoltaic-thermoelectric hybrid energy harvesting system based on functionally multiplexed intelligent thermal management

An On-Chip Transformer-Based Self-Startup Hybrid SIDITO Converter for Thermoelectric Energy Harvesting

A power conditioning system for thermoelectric generator based on interleaved Boost converter with MPPT control

A Single Inductor Tri-Input Dual-Output Buck-Boost DC-DC Converter with MPPT for Multi-Source Energy Harvesting.

Ultra-Low Power Boost Converter with Constant On-Time-Based Mppt for Energy Harvesting Applications

A Low-Voltage Self-Starting Boost Converter Using MPPT with Pulse Multiplication for Energy Harvesting