Abstract:Thermoelectric generators (TEGs) convert thermal energy directly into electrical energy using thermoelectric materials, with attractive advantages such as a lack of noise and pollution, considerable reliability, and a long lifetime. Because of the low output power and low output voltage of each TEG module, conventional thermoelectric generation systems are constituted by a centralized converter with series-connected multiple TEG modules. Power mismatch usually occurs in this system configuration due to the unbalanced temperature difference distribution, which results in lower conversion efficiency. In this paper, two solutions based on differential power processing (DPP) have been proposed to enhance the output power and conversion efficiency of the TEG system: the centralized-distributed hybrid structure and the cascaded power transfer structure, both of which realize the maximum power point tracking of each TEG module. The circuit designs and control strategies of the two proposed systems are here presented. Experimental results have demonstrated the feasibility and effectiveness of these two solutions; they have higher output power and better efficiency than the conventional TEG system. Each of these two solutions exhibits its own features and has suitable application situations. If the temperature difference distribution of all TEG modules has significant variations, the centralized-distributed hybrid structure outperforms the cascaded power transfer structure on the output power. While the temperature difference distribution is comparatively stable, the cascaded power transfer structure is superior to the centralized-distributed hybrid structure. With detailed evaluation and comparison between the two structures, the overall design for DPP-based TEG systems with different connection types has been proposed in this paper, which is the reference for the future implementation of practical TEG applications.

A High Efficiency Step-Up DC-DC Converter for Thermoelectric Generator with Wide Input Voltage Range

Step-Up DC-DC Converter Supplied by a Thermoelectric Generator for IoT Applications

A high efficiency cascaded thermoelectric generation system with power balancing mechanism

A High Efficiency Boost-Buck Converter with Coupled Inductor for Thermoelectric Generator

Evaluation of High Step-Up Power Electronics Stages in Thermoelectric Generator Systems

A 10 mV-500 mV Input Range, 91.4% Peak Efficiency Adaptive Multi-Mode Boost Converter for Thermoelectric Energy Harvesting

A TEG Efficiency Booster with Buck–Boost Conversion

Evaluation on High-Efficiency Thermoelectric Generation Systems Based on Differential Power Processing

A Thermoelectric Generation System and Its Power Electronics Stage

A power conditioning system for thermoelectric generator based on interleaved Boost converter with MPPT control

Low Voltage and Low Power Self-Startup Oscillator-Driven Boost Converter for Thermoelectric Generator Operating at Low Temperature

27.1 An 84% Peak Efficiency Bipolar-Input Boost/Flyback Hybrid Converter With MPPT and on-Chip Cold Starter for Thermoelectric Energy Harvesting

A Compact Dickson Hybrid Boost Converter with 5-Mv Input 90.5% Peak Efficiency and On-Chip Cold-Start for Thermoelectric Energy Harvesting

Hybrid Centralized-Distributed Power Conditioning System for Thermoelectric Generator with High Energy Efficiency

Thermoelectric Generator Through Dual‐Direction Thermal Regulation by Thermal Diodes for Waste Heat Harvesting

Boosting Thermoelectric Generator (TEG) Performance with Tandem Radiative/Evaporative/Phase Change Cooler

A Novel Dual-Input Boost-Buck Converter with Coupled Inductors for Distributed Thermoelectric Generation Systems

Thermal management of a flexible controlled thermoelectric energy conversion-utilization system using a multi-objective optimization

A Series Compensated Buck-Boost Converter-Based Thermoelectric Energy Harvesting System with Sliding Mode Controller

A Dickson Hybrid Boost Converter With On-Chip Cold-Start for Thermoelectric Energy Harvesting.

A High-Efficiency Dual-Polarity Thermoelectric Energy-Harvesting Interface Circuit With Cold Startup and Fast-Searching ZCD