Abstract:This study presents a comparative analysis of the accuracy of different methodologies for the design and performance evaluation of thermoelectric generators (TEGs), using analytical, computational numerical, and experimental approaches. TEGs are promising devices for capturing waste energy in industrial processes, converting waste heat into electrical energy and contributing to energy sustainability. However, the efficiency of TEGs is a significant challenge due to their low conversion rates. To address this challenge, three different methodologies were developed and systematically compared. Analytical Model: Developed for the electrical design of thermoelectric micro generators, using theoretical performance data and industrial temperature gradients. This method offers a robust theoretical view but may not capture all practical variables. Computational model in Simulink/MATLAB: Created and validated to consider the variation of the Seebeck coefficient and the internal resistance of thermoelectric modules with temperature. This model provides an accurate simulation of operating conditions but depends on the accuracy of the input parameters. Experimental Multi-string Electrical Arrangement Prototype: This involved the design and construction of a prototype followed by experimental tests to validate its performance. This method provides valuable empirical data but can be limited by the complexity and cost of the experiments. The results show that each methodology has specific advantages and limitations, offering valuable insights for the development of more efficient TEG systems. The comparison of analytical, numerical, and experimental methods revealed differences in accuracy and efficiency, highlighting the importance of an integrated approach to TEG design. This study lays a solid foundation for future research and practical applications in the field of industrial residual energy harvesting.

A Series Compensated Buck-Boost Converter-Based Thermoelectric Energy Harvesting System with Sliding Mode Controller

Design and analysis of thermoelectric energy harvester with 85.6% peak end-to-end efficiency and 38 mV self-startup using 4.13 mΩ/°C indirect temperature dependent MPPT

Improved MPPT System based on FTSMC for Thermoelectric Generator Array under Dynamic Temperature and Impedance

A Compact Dickson Hybrid Boost Converter with 5-Mv Input 90.5% Peak Efficiency and On-Chip Cold-Start for Thermoelectric Energy Harvesting

A High Efficiency Boost-Buck Converter with Coupled Inductor for Thermoelectric Generator

A TEG Efficiency Booster with Buck–Boost Conversion

A 3.5 mV Input Single-Inductor Self-Starting Boost Converter with Loss-Aware MPPT for Efficient Autonomous Body-Heat Energy Harvesting

A High Efficiency Step-Up DC-DC Converter for Thermoelectric Generator with Wide Input Voltage Range

27.1 An 84% Peak Efficiency Bipolar-Input Boost/Flyback Hybrid Converter With MPPT and on-Chip Cold Starter for Thermoelectric Energy Harvesting

A 10 mV-500 mV Input Range, 91.4% Peak Efficiency Adaptive Multi-Mode Boost Converter for Thermoelectric Energy Harvesting

A high efficiency cascaded thermoelectric generation system with power balancing mechanism

A new metaheuristic honey badger-based maximum energy harvesting algorithm for thermoelectric generation system under dynamic operating conditions

A Bipolar-Input Bipolar-Output Dc-Dc Converter For Thermoelectric Energy Harvesting

A power conditioning system for thermoelectric generator based on interleaved Boost converter with MPPT control

An Efficient Electrothermal Model of a Thermoelectric Converter for a Thermal Energy Harvesting Process Simulation and Electronic Circuits Powering

A Dickson Hybrid Boost Converter With On-Chip Cold-Start for Thermoelectric Energy Harvesting.

Thermoelectric Generator Through Dual‐Direction Thermal Regulation by Thermal Diodes for Waste Heat Harvesting

Maximum energy harvesting of centralized thermoelectric power generation systems with non-uniform temperature distribution based on novel equilibrium optimizer

Energy Management for Thermoelectric Generators Based on Maximum Power Point and Load Power Tracking

High-efficiency photovoltaic-thermoelectric hybrid energy harvesting system based on functionally multiplexed intelligent thermal management

Comparative Analysis and Integrated Methodology for the Electrical Design and Performance Evaluation of Thermoelectric Generators (TEGs) in Energy Harvesting Applications