Abstract:Thermoelectric generators (TEGs) convert thermal energy directly into electrical energy using thermoelectric materials, with attractive advantages such as a lack of noise and pollution, considerable reliability, and a long lifetime. Because of the low output power and low output voltage of each TEG module, conventional thermoelectric generation systems are constituted by a centralized converter with series-connected multiple TEG modules. Power mismatch usually occurs in this system configuration due to the unbalanced temperature difference distribution, which results in lower conversion efficiency. In this paper, two solutions based on differential power processing (DPP) have been proposed to enhance the output power and conversion efficiency of the TEG system: the centralized-distributed hybrid structure and the cascaded power transfer structure, both of which realize the maximum power point tracking of each TEG module. The circuit designs and control strategies of the two proposed systems are here presented. Experimental results have demonstrated the feasibility and effectiveness of these two solutions; they have higher output power and better efficiency than the conventional TEG system. Each of these two solutions exhibits its own features and has suitable application situations. If the temperature difference distribution of all TEG modules has significant variations, the centralized-distributed hybrid structure outperforms the cascaded power transfer structure on the output power. While the temperature difference distribution is comparatively stable, the cascaded power transfer structure is superior to the centralized-distributed hybrid structure. With detailed evaluation and comparison between the two structures, the overall design for DPP-based TEG systems with different connection types has been proposed in this paper, which is the reference for the future implementation of practical TEG applications.

Design and analysis of thermoelectric energy harvester with 85.6% peak end-to-end efficiency and 38 mV self-startup using 4.13 mΩ/°C indirect temperature dependent MPPT

A 3.5 mV Input Single-Inductor Self-Starting Boost Converter with Loss-Aware MPPT for Efficient Autonomous Body-Heat Energy Harvesting

A Compact Dickson Hybrid Boost Converter with 5-Mv Input 90.5% Peak Efficiency and On-Chip Cold-Start for Thermoelectric Energy Harvesting

A Dickson Hybrid Boost Converter With On-Chip Cold-Start for Thermoelectric Energy Harvesting.

Parametric Characteristics and Optimization of a Novel Near-Field Thermophotovoltaic and Thermoelectric Hybrid System for Energy Harvest

A Series Compensated Buck-Boost Converter-Based Thermoelectric Energy Harvesting System with Sliding Mode Controller

High-efficiency photovoltaic-thermoelectric hybrid energy harvesting system based on functionally multiplexed intelligent thermal management

27.1 An 84% Peak Efficiency Bipolar-Input Boost/Flyback Hybrid Converter With MPPT and on-Chip Cold Starter for Thermoelectric Energy Harvesting

Improved MPPT System based on FTSMC for Thermoelectric Generator Array under Dynamic Temperature and Impedance

Energy Management for Thermoelectric Generators Based on Maximum Power Point and Load Power Tracking

A 10 mV-500 mV Input Range, 91.4% Peak Efficiency Adaptive Multi-Mode Boost Converter for Thermoelectric Energy Harvesting

A TEG Efficiency Booster with Buck–Boost Conversion

A power conditioning system for thermoelectric generator based on interleaved Boost converter with MPPT control

Maximum energy harvesting of centralized thermoelectric power generation systems with non-uniform temperature distribution based on novel equilibrium optimizer

A Thermoelectric Energy Harvesting System Assisted by A Piezoelectric Transducer Achieving 10-mV Cold-Startup and 82.7% Peak Efficiency

A High-Efficiency Dual-Polarity Thermoelectric Energy-Harvesting Interface Circuit With Cold Startup and Fast-Searching ZCD

A new metaheuristic honey badger-based maximum energy harvesting algorithm for thermoelectric generation system under dynamic operating conditions

A Power Management System For Thermoelectric Generators Used On Spindle Units Of Machine Tools

A Bipolar-Input Thermoelectric Energy-Harvesting Interface with Boost/Flyback Hybrid Converter and On-Chip Cold Starter

Design of a Wearable Thermoelectric Generator for Harvesting Human Body Energy

Evaluation on High-Efficiency Thermoelectric Generation Systems Based on Differential Power Processing