Abstract:A self-powered convertor for thermoelectric energy harvesting in body sensor nodes (BSNs) is designed to boost extremely low voltage to the typical supply voltage of BSNs. An adaptive maximum power point tracking (MPPT) based on digitally controlled oscillator (DCO) is achieved by adjusting the switching frequency according to the relation between the half open-circuit voltage of thermoelectric generator and the equivalent voltage. DCO exhibits small line sensitivity and temperature coefficient (TC). Radio frequency (RF) kick-start based on a self-synchronous rectifier is introduced to achieve the no-battery effect. A modified zero current switching based on the common-gate comparator is utilised to decrease the power dissipation of power metal–oxide–semiconductor field-effect transistors. In addition, the power dissipation of the main blocks is reduced by discontinuing the clocked and common-gate comparators after comparison in each cycle, and by making most transistors of DCO and the complementary metal-oxide-semiconductor (CMOS) voltage reference work in the weak inversion or linear region. The zero TC principle of the CMOS voltage reference is extended to all process. The novel convertor is designed and verified in Central Semiconductor Manufacturing Corporation CMOS 0.18 µm process. The results reveal that it achieves adaptive MPPT without battery and exhibits a peak end-to-end efficiency of about 63%.

Ultra-Low Power Boost Converter with Constant On-Time-Based Mppt for Energy Harvesting Applications

30–300mV input, ultra-low power, self-startup DC-DC boost converter for energy harvesting system

Wide-Range, High-Precision and Low-Complexity Mppt Circuit Based on Perturb and Observe Algorithm

A Low-Voltage Self-Starting Boost Converter Using MPPT with Pulse Multiplication for Energy Harvesting

A Compact Dickson Hybrid Boost Converter with 5-Mv Input 90.5% Peak Efficiency and On-Chip Cold-Start for Thermoelectric Energy Harvesting

A Dickson Hybrid Boost Converter With On-Chip Cold-Start for Thermoelectric Energy Harvesting.

An Ultra-low-power Gain-boost Class-C Inverter and Its Application

A novel MPPT circuit with 99.1% tracking accuracy for energy harvesting

A 20-Mv Input DC/DC Converter for Energy Harvesting Applications

A Low-Input DC/DC Converter for Energy Harvesting

A burst-mode based boost converter harvesting photovoltaic energy for low power applications

A Novel Interface Circuit with 99.2% MPPT Accuracy and 1.3% THD for Energy Harvesting.

A Single Inductor Tri-Input Dual-Output Buck-Boost DC-DC Converter with MPPT for Multi-Source Energy Harvesting.

A High‐efficiency Power Management Unit with Wide Dynamic Range for RF Energy Harvesting System

A Batteryless Single-Inductor Boost Converter with 190 Mv Self-Startup Voltage for Thermal Energy Harvesting over a Wide Temperature Range.

83.9% Efficiency 100-Mv Self-Startup Boost Converter for Thermoelectric Energy Harvester in IoT Applications

An Asynchronous AC-DC Boost Converter with Event-Driven Voltage Regulator and 94% Efficiency for Low-Frequency Electromagnetic Energy Harvesting.

Efficient Self-Powered Convertor with Digitally Controlled Oscillator-Based Adaptive Maximum Power Point Tracking and RF Kick-Start for Ultralow-Voltage Thermoelectric Energy Harvesting

An Input-Powered High-Efficiency Interface Circuit with Zero Standby Power in Energy Harvesting Systems

Ultra-low-voltage Low-Power Charge Pump for Solar Energy Harvesting Systems

A 0.3V–1.2V Ultra-Low Input Voltage, Reconfigurable Switched-Capacitor DC-DC Converter for Energy Harvesting System