Abstract:Electricity power has served as an essential source in our daily life. However, some remote areas that are difficult to be covered by the power grid, are still facing a serious shortage of electricity for outdoor equipment such as field monitors. Off-grid power is the alternative power in such areas, but there arise apparently economic and environmental problems. Therefore, the development of portable, pollution-free and sustainable power supply equipment has vital research significance. In this paper, based on the radiative cooling and greenhouse effects, a passive thermoelectric system without any active energy input is proposed. A square copper plate coated with a thin film of acrylic acid doped with SiO2 particles, with an average emissivity value of 0.937, is selected as a radiative cooling material. The commercial polyolefin film with a thickness of 0.12 mm is selected as a greenhouse material. The radiative cooling effect cools the cold end of the thermoelectric generator (TEG) during the nighttime, the greenhouse effect during the daytime is utilized to increase the temperature of the hot end of the TEG. The radiative cooling effect and the greenhouse effect both result in the increase of the temperature difference between the cold and hot ends, and thus obtaining the output power. During the period of time from June 17 to June 21, 2020, the performance of the designed system at the location of Shaanxi, China was evaluated experimentally, and the weather condition effects were also studied. The experimental results show that a stable temperature drop of ～1.1 ℃ of the cold end is achieved via the radiative cooling effect at night. Owing to the greenhouse effect, the temperature increase of the hot end reaches a maximum value of 13.9 ℃. When the average ambient humidity decreases from 45% to 20%, the average temperature difference between the hot end and cold end of the thermoelectric module increased from 1.6 to 1.9 ℃ throughout the day, and the average power increased from 47.8 to 67.3 mW/m2, indicating that the equipment can have better power generation performance under the condition of 20% ambient humidity. The device developed in this work realizes all-day passive output and shows that it has potential applications in off-grid power supplies.

A Low-Power Thermoelectric Power Generation System Based on a Periodic Thermoelectric Power Generation Method in the Form of Heat Pulses

A Power Management System For Thermoelectric Generators Used On Spindle Units Of Machine Tools

A flat radiative cooling thermoelectric generator for high performance power generation

A Thermoelectric Generation System and Its Power Electronics Stage

Optimized Thermoelectric Generation for Efficient Low-Medium Temperature Geothermal Energy Harvesting

Thermoelectric Generator Through Dual‐Direction Thermal Regulation by Thermal Diodes for Waste Heat Harvesting

Research on the Performance of Thermoelectric Self−Powered Systems for Wireless Sensor Based on Industrial Waste Heat

Performance Analysis of Thermoelectric System Based on Radiative Cooling and Greenhouse Effects

CMOS MEMS-based Thermoelectric Generator with an Efficient Heat Dissipation Path

Investigation on Waste Heat Recovery of a Nearly Kilowatt Class Thermoelectric Generation System Mainly Based on Radiation Heat Transfer

Recent developments of thermoelectric power generation

Experimental Investigation On Thermoelectric Generator Of Micro Hybrid Power Source

Design a High-Performance Thermoelectric Generator by Analyzing Industrial Heat Transfer

83.9% Efficiency 100-Mv Self-Startup Boost Converter for Thermoelectric Energy Harvester in IoT Applications

Evaluation on High-Efficiency Thermoelectric Generation Systems Based on Differential Power Processing

Dynamic Piezo-Thermoelectric Generator for Simultaneously Harvesting Mechanical and Thermal Energies

Industrial Experiment and Numerical Analysis of the Effect of Pulsing Water Flow in Thermoelectric Generators

A cascaded thermoelectric generation system for low‐grade heat harvesting

Pulsating Heat Pipe and Thermo-Electric Generator Jointly Applied in Renewable Energy Exploitation: Analytical and Experimental Investigations

Analyzing and optimizing the power generation performance of thermoelectric generators based on an industrial environment

Power Generation on Chips: Harvesting Energy From the Sun and Cold Space