Abstract:With the development of 5G technology, the accurate measurement of the complex permittivity of a printed circuit board (PCB) in the wide frequency range is crucial for the design of high-frequency circuits. In this paper, a microwave measurement device and method based on the double-sided parallel-strip line (DSPSL) resonator have been developed to measure the complex permittivity of typical PCBs in the vertical direction. The device includes the DSPSL resonator, the DSPSL coupling probe, a pressure monitor, a Farran C4209 vector network analyzer (100 K to 9 GHz), and a FEV-10-PR-0006 frequency multiplier (75–110 GHz). Based on transmission line theory, the physical model of the DSPSL resonator was established, and the relative permittivity and loss angle tangent value of the dielectric substrate were calculated using conformal transformation. To excite the resonator, the DSPSL coupling probe with a good transmission effect was designed, which consists of DSPSL microstrip line (MSL) transition structure and an MSL-WR10 rectangular waveguide converter. To reduce the air gap between the sample and the metal guide band and dielectric support block, and to improve test accuracy, a mechanical pressure device is added to the top of the DSPSL resonator. Based on the DSPSL resonator, we have used the device to test four typical PCBs, namely, polytetrafluoroethylene, Rogers RT/duroid®5880, Rogers RO3006®, and Rogers RO3010®. The results show that the maximum error of the relative permittivity is less than 3.05%, and the maximum error of the loss angle tangent is less than 1.27 × 10−4.

Dielectric Characterization of RF-Printed Circuit Board Materials by Microstrip Transmission Lines and Conductor-Backed Coplanar Waveguides Up to 110 GHz

A Method to Determine Broadband Complex Permittivity of Thin Film Dielectric Materials up to 60 GHz

Extraction of the Complex Permittivity of PCB

Attenuation Measurement of the Dielectric Rod Using Parallel Strips with a Resonable Field Environment

Analysis of Conductor Loss in Interdigital Capacitor Based Measurement of Dielectric Constant of Ferroelectric Thin Film

A Broadband Permeability Measurement of Fetan Lamination Stack by the Shorted Microstrip Line Method

Frequency-Dependent Maximum Average Power-Handling Capabilities of Single and Edge-Coupled Microstrip Lines on Low-Temperature Co-Fired Ceramic (ltcc) Substrates

PCB DK and DF Extraction Based on the Wheeler Incremental Inductance Method

Wide-band characterization of average power handling capabilities of some microstrip interconnects on polyimide and polyimide/GaAs substrates

Permittivity measurement of high-frequency substrate based on the double-sided parallel-strip line resonator method

An Enhanced Broadband Continuous Extraction Approach for Complex Propagation Constants of Differential Transmission Lines

Analysis of broadband microwave conductivity and permittivity measurements of semiconducting materials

Measuring Dielectric Properties and Surface Resistance of Microwave PCBs in the K-band

Dielectric Constant Determination for Thin Film by Using Reflection Resonance Microstrip Line Method

Complex Permittivity Characterization of Low-Loss Dielectric Slabs at Sub-THz

Advancements in FR4 dielectric analysis: Free space approach and measurement validation

Influence of the PCB Manufacturing Process on the Measurement Error of Planar Relative Permittivity Sensors Up To 100 GHz

3D-Printed Dielectric Image Lines towards Chip-to-Chip Interconnects for subTHz-Applications

An Enhanced One-Port Waveguide Method for Sheet Resistance Extraction

Noncontact dielectric constant metrology of low-k interconnect films using a near-field scanned microwave probe

Measurement of Dielectric Constant of Thin Film Materials at Microwave Frequencies