Abstract:With the development of 5G technology, the accurate measurement of the complex permittivity of a printed circuit board (PCB) in the wide frequency range is crucial for the design of high-frequency circuits. In this paper, a microwave measurement device and method based on the double-sided parallel-strip line (DSPSL) resonator have been developed to measure the complex permittivity of typical PCBs in the vertical direction. The device includes the DSPSL resonator, the DSPSL coupling probe, a pressure monitor, a Farran C4209 vector network analyzer (100 K to 9 GHz), and a FEV-10-PR-0006 frequency multiplier (75–110 GHz). Based on transmission line theory, the physical model of the DSPSL resonator was established, and the relative permittivity and loss angle tangent value of the dielectric substrate were calculated using conformal transformation. To excite the resonator, the DSPSL coupling probe with a good transmission effect was designed, which consists of DSPSL microstrip line (MSL) transition structure and an MSL-WR10 rectangular waveguide converter. To reduce the air gap between the sample and the metal guide band and dielectric support block, and to improve test accuracy, a mechanical pressure device is added to the top of the DSPSL resonator. Based on the DSPSL resonator, we have used the device to test four typical PCBs, namely, polytetrafluoroethylene, Rogers RT/duroid®5880, Rogers RO3006®, and Rogers RO3010®. The results show that the maximum error of the relative permittivity is less than 3.05%, and the maximum error of the loss angle tangent is less than 1.27 × 10−4.

Extraction of the Complex Permittivity of PCB

PCB DK and DF Extraction Based on the Wheeler Incremental Inductance Method

Permittivity measurement of high-frequency substrate based on the double-sided parallel-strip line resonator method

An Enhanced Broadband Continuous Extraction Approach for Complex Propagation Constants of Differential Transmission Lines

Capacitance extraction of high-density 3D interconnects using finite element method

Fast characterization of hybrid near-field coupling effects of multi-PCBs in rectangular cavities with FFT-accelerated integral-equation method

Ground Plane Effect on the De-embedding Accuracy for Surface Mount Devices

A Hybrid De-embedding Method for Low Loss and Reciprocal PCB Fixtures

Capacitance Extraction of Three-Dimensional Interconnects Using Element-By-Element Finite Element Method (Ebe-Fem) and Preconditioned Conjugate Gradient (pcg) Technique

Efficient DC and AC Impedance Calculation for Arbitrary-Shape and Multilayer PDN Using Boundary Integration

An Efficient Approach to Find the Truncation Frequency for Transmission Line-Based Dielectric Material Property Extraction

Efficient Analysis of Radiated Immunity of Printed Circuit Boards Using SPICE

Dielectric Loss Tangent Extraction Using Modal Measurements and 2-D Cross-Sectional Analysis for Multilayer PCBs

A Two-Port Measurement With Mechanically Robust Handhold Probes for Ultra Low PDN Impedance

Comparison Of Two Compact 2d-Fdfd Methods And Their Application To Extraction Of Circuit Parameters

Direct Extraction of Complex Permittivity and Permeability of Materials on a Known-Substrate from Transmission/Reflection Measurements

Analysis on the Effectiveness of the 20-H Rule Using Numerical Simulation Technique

Influence of the PCB Manufacturing Process on the Measurement Error of Planar Relative Permittivity Sensors Up To 100 GHz

A Method to Determine Broadband Complex Permittivity of Thin Film Dielectric Materials up to 60 GHz

Dielectric Characterization of RF-Printed Circuit Board Materials by Microstrip Transmission Lines and Conductor-Backed Coplanar Waveguides Up to 110 GHz

A hybrid domain decomposition and optimization method for predicting electromagnetic emissions from printed circuit boards