Abstract:The modern era of technology contains a myriad of high-speed standards and proprietary serial digital protocols, which evolve alongside the microwave and RF realm. The increasing data rate push the requirements for hardware design, including modern printed circuit boards (PCB). One of these requirements for modern high-speed PCB interfaces are a homogenous track impedance all the way from the source to the load. Even though some high-speed interfaces don't require any external components embedded into the interconnects, there are others which require either passive or active components-or both. Usually, component package land-pads are of fixed size, thus, if not addressed, they create discontinuities and degrade the transmitted signal. To solve this problem, impedance compensation techniques such as reference plane cut-out are employed for multiple case studies covering this topic. This paper presents an original method of finding the optimal cut-out size for the maximum characteristic impedance compensation in high-density multilayer PCB designs, which has been verified via theoretical estimation, computer simulation, and practical measurement results. Track-to-discontinuity ratios of 1:1.75, 1:2.5, and 1:5.0 were selected in order to resemble most practical design scenarios on a 6-layer standard thickness PCB. The measurements and simulations revealed that the compensated impedance saturation occurs at (150-250%) cut-out widths for a 50 Ω microstrip.

A Hybrid De-embedding Method for Low Loss and Reciprocal PCB Fixtures

A Deembedding Method for the S-Parameter Extraction of Surface-Mounted Devices with Asymmetric Fixtures

Ground Plane Effect on the De-embedding Accuracy for Surface Mount Devices

An Improved 1X De-Embedding Method for Fixtures with Impedance Discontinuities

A Simple Solder-Free Fixture for Surface Mounted Device Measurement

Extraction of the Complex Permittivity of PCB

Parallel Electromagnetic Modeling for Connectors Based on Domain Decomposition Preconditioners

A Novel De-embedding Method Based on Artificial Neural Network

MMIC on-Wafer Test Method Based on Hybrid Balanced and Unbalanced RF Pad Structures

Fast characterization of hybrid near-field coupling effects of multi-PCBs in rectangular cavities with FFT-accelerated integral-equation method

An LC Resonant Method for the Accurate Extraction of Small Parasitic Resistance

Asymmetrical De-Embedding Method for Millimeter-Wave On-Wafer Measurement

PCB DK and DF Extraction Based on the Wheeler Incremental Inductance Method

A hybrid domain decomposition and optimization method for predicting electromagnetic emissions from printed circuit boards

Analysis of Smt Decoupling Capacitor Placement in Electronic Packages Using Hybrid Modeling Method

A Method of Optimizing Characteristic Impedance Compensation Using Cut-Outs in High-Density PCB Designs

Efficient Reciprocity-Based Hybrid Approach For Analyzing Radiated Susceptibility Responses Of Multilayer Pcbs

Influence of Solder on De-Embedded Capacitance

Electromagnetic Coupling Estimation Based on Hybrid Equivalent Dipoles and Field-Circuit Models

EMI Source Reconstruction by Using Equivalent Dipoles at Different Height

Dielectric Loss Tangent Extraction Using Modal Measurements and 2-D Cross-Sectional Analysis for Multilayer PCBs