Abstract:A numerical modeling study, based on 3D finite element method (FEM) simulation and 1D analytical solutions, has been carried out to evaluate the capabilities of two ac methods for measuring in-plane thermal conductivity of thin film deposited on the back of a suspended SiNx membrane setup. Two parallel metal strips are present on the top of the dielectric membrane. One strip (S1) serves as both heater and thermometer, while another one (S2) acts as thermometer only. For a modified phase shift (MPS) method, it is crucial to extract the in-plane thermal diffusivity from the phase shift of the temperature oscillation on S2. It was found that the frequency window for carrying out the data fitting became narrower as the in-plane thermal diffusivity of the composite membrane (<math>α∥,C</math>) increased, primarily due to the failure of the semi-infinite width assumption in the low frequency region. To ensure the validity of the method, the upper limit of <math>α∥,C</math> should not exceed ~1.8 × 10−5 m2 s−1 for the specific membrane dimension under consideration (1 × 1 mm2). On the other hand, inspired by a modified Ångström method proposed by Zhu recently, we suggest a new data reduction methodology which takes advantage of the phase shift on both S1 and S2 as well as the amplitude on S1. Based on the simulation results, it is expected that the non-ideality associated with the three "observables" may be at least partially canceled out. Therefore, the frequency window selection for carrying out the data fitting is not sensitive to the magnitude of <math>α∥,C</math> and the upper limit of measurable <math>αC,∥</math> can be further increased with respect to the MPS method. For typical specimen films whose in-plane thermal conductivity ranges from 0.84 W m−1 K−1 to 50 W m−1 K−1, the method proposed here yields a theoretical measurement uncertainty of less than 5%.

An Enhanced One-Port Waveguide Method for Sheet Resistance Extraction

A Broadband Permeability Measurement of Fetan Lamination Stack by the Shorted Microstrip Line Method

Contactless Measurement of Sheet Resistance of Nanomaterial Using Waveguide Reflection Method

A General Method to Accurately Measure the Thin-Film Sheet Resistance for Sensors

Contactless Measurement of Thin Film Conductivity by A Microwave Compact Equipment

Conductivity Extraction Using a 180 GHz Quasi-Optical Resonator for Conductive Thin Film Deposited on Conductive Substrate

Contactless Measurement Of Electrical Conductivity Of Si Wafers Independent Of Wafer Thickness

An Improved NRW Method for Thin Material Characterization Using Dielectric Filled Waveguide and Numerical Compensation

Nondestructive Measurement and High-Precision Evaluation of the Electrical Conductivity of Doped GaAs Wafers Using Microwaves.

PCB DK and DF Extraction Based on the Wheeler Incremental Inductance Method

Measurement of the Thermal Transport Properties of Dielectric Thin Films Using the Micro-Raman Method

An Enhanced Broadband Continuous Extraction Approach for Complex Propagation Constants of Differential Transmission Lines

Numerical modeling of in-plane thermal conductivity measurement methods based on a suspended membrane setup

Attenuation Measurement of the Dielectric Rod Using Parallel Strips with a Resonable Field Environment

A Modified Open-Ended Rectangular Waveguide Based Reflection Approach for Dielectric Constant Characterization of Low-Loss Slab Materials

An X-band waveguide measurement technique for the accurate characterization of materials with low dielectric loss permittivity

A Method for Measuring Resistance of Metal Interconnection Inside Chip

An Improved Waveguide Method for Accurate Complex Permittivity Measurement of Medium/High-Loss Material

Extraction of electromechanical coupling coefficient of piezoelectric thin films deposited on substrates

Research on Effective Area of Surface Resistance Measurement of Superconducting Thin Film at Microwave Frequencies

Radio-Frequency Conductivity Evaluation Method Based on Surface/Interface Scattering of Metallic Coatings