Abstract:Ti–B 4 C system is one of the most important reaction material systems for preparing TiB 2 –TiC composite coatings, but the difficulty of densification in preparing TiB 2 –TiC composite coatings by plasma spraying Ti–B 4 C system composite powder has greatly limited its application. In order to remove the inherent defects of the microstructure and properties of the coatings prepared by plasma spraying Ti–B 4 C system composite powder, the TiB 2 –TiC composite ceramic coatings were prepared on the surface of TC 4 titanium alloy substrate by plasma spraying reaction synthesis process with Ti–B 4 C as the base system and adding appropriate graphite additive. The influence of graphite additive on the microstructure and mechanical properties (hardness, scratch resistance, erosion and wear resistance) of the coatings prepared by plasma spraying Ti–B 4 C system composite powder was investigated. It was found that the main phases of the coating obtained by plasma spraying Ti–B 4 C–C system composite powder were TiB 2 and TiC, and the density of the coating was increased. The TiB 2 –TiC composite coating prepared by plasma spraying Ti–B 4 C–C system composite powder had higher microhardness, better scratch resistance, erosion resistance and wear resistance. The reason is that the addition of graphite improved the melting state of the composite powder during the plasma spraying process, accelerated the reaction rate of the spraying system, and increased the density of the resulting coating. The results of this study will provide a theoretical basis for the microstructure control and optimization of TiB 2 –TiC composite coating synthesized by plasma spraying Ti–B 4 C system composite powder.

Microstructure and properties of in-situ ZrB2-ZrC composite coatings by plasma spraying

Microstructure characterization of in-situ ZrC composite coating with graceful toughness and improved tribological properties prepared by plasma spraying

Effects of SiC on microstructure and properties of plasma sprayed ZrB2–ZrC composite coating

Toughening mechanism of in-situ synthesized ZrB2 based composite coating by plasma spraying

Microstructure and properties of CrB2-Cr3C2 composite coatings prepared by plasma spraying

Microstructure and properties of Cr7C3-CrSi2 composite coatings prepared by plasma spraying

In-situ synthesis, microstructure, and properties of NbB2-NbC-Al2O3 composite coatings by plasma spraying

Microstructure, formation mechanism and properties of plasma-sprayed Cr7C3—CrSi2—Al2O3 coatings

Microstructure and properties of Al2O3–ZrO2–TiO2 composite coatings prepared by plasma spraying

Synthesis of In Situ ZrB2-SiC-ZrC Coating on ZrC-SiC Substrate by Reactive Plasma Spraying

In-situ TiC-Ti5Si3-SiC composite coatings prepared by plasma spraying

Comparison of plasma sprayed NbB2-NbC coatings obtained by ex-situ and in-situ approaches

Low-pressure plasma spraying of ZrB2-SiC coatings on C/C substrate by adding TaSi2

TiC-TiSi2-Al2O3 composite coatings prepared by spray drying, heat treatment and plasma spraying

Oxidation ablation resistance of ZrB2-HfB2-SiC-TaSi2 coating prepared on C/C composite surface

TEM characterization and reaction mechanism of composite coating fabricated by plasma spraying Nb–SiC composite powder

Influence of graphite additive on microstructure and mechanical characteristics of plasma sprayed TiB2–TiC composite coating

TEM characterization and toughening mechanism of in-situ NbB2-NbC-Al2O3 composite coatings prepared by plasma spraying

Phase, microstructure and property evolutions of reactively synthesized YSZ-ZrC composite coating based on the content regulation of the precursor

Microstructure and Ablation Behavior of W Coating Prepared by Atmospheric Plasma Spraying for Zr/Cu Infiltrated C/C Composites

Effect of nano‐Al 2 O 3 on the microstructure and properties of NbB 2 ‐NbC composite coatings prepared by plasma spraying