Abstract:Ductile Nb particles have been applied to toughen TiAl-based intermetallic alloys due to the positive effects of the Nb element on their mechanical and processing properties. However, the room-temperature (RT) fracture toughness of powder metallurgical (PM) TiAl–Nb composites needs further improvement to avoid micro-cracks in complex components prepared by PM near-net shape technologies. Herein, a facile heat treatment—annealing in the (α+γ) phase region for a short duration and air-cooling—was applied to strengthen and toughen a PM TiAl–Nb composite. The phase and microstructure evolution of the PM composite during annealing, and their effects on mechanical properties and fracture behaviors, were investigated specifically. It is found that after annealing, the volume fraction of α 2 phase increased markedly, while that of the B2 phase decreased significantly, and the Nb solid solution (Nb ss ) phase almost completely disappeared; the microstructures of the TiAl–Nb composite became significantly finer and more uniform overall, and the microstructure type of the TiAl matrix transformed from near-gamma (NG) to duplex (DP). Both the RT tensile strength and fracture toughness of the TiAl–Nb composite improved markedly after annealing. The strengthening mechanisms for the as-annealed composite were primarily based on the phase and microstructure evolution. The toughening mechanisms for the as-annealed composite included the generation of shear ligaments, delaminations, crack deflection and branching. The improvement in tensile strength and the reduction in work-hardening exponent made the composite tougher through facile annealing. The incorporation of Nb particles and further heat treatment can efficiently facilitate the improvement in fracture toughness of PM TiAl-based alloy.

TEM characterization and toughening mechanism of in-situ NbB2-NbC-Al2O3 composite coatings prepared by plasma spraying

In-situ synthesis, microstructure, and properties of NbB2-NbC-Al2O3 composite coatings by plasma spraying

Microstructure and properties of niobium carbide composite coatings prepared by plasma spraying

Effect of nano‐Al 2 O 3 on the microstructure and properties of NbB 2 ‐NbC composite coatings prepared by plasma spraying

TEM characterization and reaction mechanism of composite coating fabricated by plasma spraying Nb–SiC composite powder

Microstructure characterization of in-situ ZrC composite coating with graceful toughness and improved tribological properties prepared by plasma spraying

Toughening mechanism of in-situ synthesized ZrB2 based composite coating by plasma spraying

Comparison of plasma sprayed NbB2-NbC coatings obtained by ex-situ and in-situ approaches

Microstructure and properties of CrB2-Cr3C2 composite coatings prepared by plasma spraying

Microstructure and fracture toughness of a TiAl-Nb composite consolidated by spark plasma sintering

Ablation resistance and mechanism of niobium carbide coatings fabricated by plasma spraying

Microstructure, formation mechanism and properties of plasma-sprayed Cr7C3—CrSi2—Al2O3 coatings

Interfacial Reaction Induced Synergetic Strengthening Effects on the Plasma Sprayed Ni3Al Composite Coating Reinforced with Hexagonal Boron Nitride Nanoplatelets

Microstructure and properties of in-situ ZrB2-ZrC composite coatings by plasma spraying

In-situ synthesis of Al2O3-reinforced high Nb–TiAl laminated composite with an enhanced strength-toughness performance

Microstructural evolution during annealing of a powder metallurgical TiAl–Nb composite and its effect on mechanical properties

Toughening and Strengthening Mechanism of Plasma Sprayed Nanostructured Al2O3–13 Wt.%tio2 Coatings

TEM Exploration of In-Situ Nanostructured Composite Coating Fabricated by Plasma Spraying 8Ysz-Al-sic Composite Powder

Friction and wear characteristics of in-situ Cr+(Cr,Al)2O3 composite coating fabricated by plasma spraying

Preparation Nanostructured FeAl2O4-Al2O3-Fe Composite Coating by SHS Plasma Spraying Technology

Microstructure and Mechanical Properties of in Situ Al2O3 Particles Reinforced Two-Phase TiAl-based Composites