Abstract:To improve the high-temperature ablation resistance of Nb alloys, multiphase-multilayer ceramic coatings were prepared using a novel strategy combining halide activated pack cementation (HAPC) and liquid plasma-assisted particle deposition and sintering (LPDS) methods. The MoSi2, Yb2O3, and ZrC particles were deposited individually or co-deposited on the NbSi2 bottom layer to obtain NbSi2/SiO2-Nb2O5/MoSi2 (Mo), NbSi2/SiO2-Nb2O5/MoSi2-Yb2O3-SiO2 (MoYb), NbSi2/SiO2-Nb2O5/MoSi2-Yb2O3-ZrO2-ZrC (MoYbZr) multilayer ceramic coatings, respectively. Results showed that all three coatings remained intact after propane ablation (1500 degrees C), exhibiting excellent ablation resistance. For the harsher oxyacetylene ablation environments with higher temperatures (1800 degrees C), Mo coating suffered from long cracks, bubbling, and localized spalling and MoYb coating sprouted massive cracks without spalling. The oxide scale integrity of the MoYbZr coating was well maintained without cracks, exhibiting excellent resistance to oxyacetylene ablation attributed to the incorporation of Yb2O3 and ZrC. The mass and linear ablation rates of MoYbZr coating were only 0.137 mg/s and 0.196 mu m/s after oxyacetylene ablation, which were 25.14 % and 49.61 % lower than that of MoYb coating, and 88.01 % and 75.37 % lower than that of the Mo coating, respectively. The Yb2O3 strengthened the Si-O bonding in the SiO2 network and increased the viscosity of the SiO2 scale, thus enhancing the self-healing ability of the oxide scale and slowing down the evaporation of SiO2. The oxidation products (ZrO2 with SiO2) from MoSi2 and ZrC further reacted to produce ZrSiO4, which can inhibit microcrack creation and extension. Micropores in the Zr-Si-O oxide scale mitigated thermal stresses, inhibited crack initiation and extension. The Yb2O3, Yb2SiO5, and ZrSiO4 embedded in the SiO2-ZrO2 scale acted as pinning effects, enhancing the high-temperature structural stability, thereby improving the ablation resistance of the MoYbZr coatings.

Ablation resistance and mechanism of niobium carbide coatings fabricated by plasma spraying

Microstructure and properties of niobium carbide composite coatings prepared by plasma spraying

Superior Ablation Resistance of Plasma Sprayed SiC Based Coating by Structural Optimized Powders

TEM characterization and reaction mechanism of composite coating fabricated by plasma spraying Nb–SiC composite powder

Comparing Ablation Properties of NbC and NbC-25 Mol.% ZrC Coating on SiC-coated C/C Composites

In-situ synthesis, microstructure, and properties of NbB2-NbC-Al2O3 composite coatings by plasma spraying

Effect of nano‐Al 2 O 3 on the microstructure and properties of NbB 2 ‐NbC composite coatings prepared by plasma spraying

Microstructure Characteristics and Ablation Behavior of an Al1.92 Cr0.08 O3-SiC-ZrC Anti-Ablation Coating

Ablation Behaviors and Mechanism of ZrC-SiC-Si/SiC-Si Double-Layered Coatings on C/C Composite under Plasma Flame at 3000 °C

Ablation Mechanism and Elevated Ablation Resistance of In-Situ Zrc-Zrsi2 Composite Coating Prepared by Plasma Spraying

Ablation Behavior of ZrB 2 -Based Coating Prepared by Supersonic Plasma Spraying for SiC-Coated C/C Composites under Oxyacetylene Torch

Solubility, crystal growth, and film-formation mechanism of NbC-modified ZrC coating under oxyacetylene flame

Microstructural Evolution and Ablation Behaviors of NbSi2/SiO2–Nb2O5/X (x=mosi2, MoSi2-Yb2O3, MoSi2-Yb2O3–ZrC) Multilayer Coatings on Nb Alloy in Different Ablation Environments

Comparison of plasma sprayed NbB2-NbC coatings obtained by ex-situ and in-situ approaches

A Novel Cr-doped Al2O3-SiC-ZrC Composite Coating for Ablative Protection of C/C-ZrC-SiC Composites

Study on the Ablation Resistance of ZrB2-SiC-LaSi2 Coating Prepared on the C/C Composites

Microstructures and Ablation Resistance of Zrc Coating for Sic-Coated Carbon/Carbon Composites Prepared by Supersonic Plasma Spraying

Ablation Resistance and Mechanism of SiC/ZrC-ZrB2double Layer Coating for C/C Composites under Plasma Flame

Ablation resistance and mechanism of SiC/ZrC-ZrB2 double layer coating for C/C composites under plasma flame

Ablation resistance of SiC-modified nanocomposite ceramic coating prepared by LPDS method on titanium alloy

Ablation Resistant Properties And Mechanism Of Zrc Coating Deposited By Plasma-Spraying