Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Polypropylene nanocomposites produced by in‐situ grafting of maleic anhydride using different mixing procedures

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Preparation of Polypropylene/MMT Nanocomposites Using Complex Supported Catalysts

In Situ Polymerization of Poly(methyl Methacrylate)/clay Nanocomposites in Supercritical Carbon Dioxide

Preparation of poly(propylene)/clay layered nanocomposites by melt intercalation from pristine montmorillonite (MMT)

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Effect of Multi-Monomer Grafted Polyolefin Elastomer/Polypropylene on the Structure and Properties of Polypropylene/Montmorillonite Nanocomposites

Influence of Maleic Anhydride Grafted Polypropylene on the Dispersion of Clay in Polypropylene/Clay Nanocomposites

TOUGHENING OF ETHYLENE-PROPYLENE RANDOM COPOLYMER/CLAY NANOCOMPOSITES： COMPARISON OF DIFFERENT COMPATIBILIZERS

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Kinetics in high-temperature free-radical reactive processing: Grafting maleic anhydride onto polypropylene in the presence of nanoclay-supported peroxide

Investigation Into Poly(propylene)/Montmorillonite/Calcium Carbonate Nanocomposites

Poly(propylene carbonate)/clay nanocomposites with enhanced mechanical property, thermal stability and oxygen barrier property

Solid-State Graft Polymerization Of Styrene In Spherical Polypropylene Particles In The Presence Of Montmorillonite

Effect of Polyethylene Glycol-Intercalated Organoclay on Vulcanization Characteristics and Reinforcement of Natural Rubber Nanocomposites

Investigation on polypropylene and polyamide-6 alloys/montmorillonite nanocomposites

Effect of Organo-Montmorillonite on the Compatibility of Polyamide 66/polypropylene Blend

Preparation and thermal stability of polypropylene/montmorillonite nanocomposites

Effect of Repeated Extrusion Cycles on the Structure and Properties of Polypropylene/Polyolefin Elastomer/Organic Montmorillonite Nanocomposites Using a β-Nucleating Agent

Clay Intercalation and Influence on Flammability and Crystallization Behaviors of POE‐based Nanocomposites

Preparation and Flammability Properties of Polyethylene/clay Nanocomposites by Melt Intercalation Method from Na+ Montmorillonite