Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Influence of Maleic Anhydride Grafted Polypropylene on the Dispersion of Clay in Polypropylene/Clay Nanocomposites

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Simultaneous Graft Polymerization of Polypropylene with Maleic Anhydride and Butyl Acrylate

Preparation and linear rheological behavior of polypropylene/MMT nanocomposites

Effects of clay contents on the dynamic mechanical and rheological properties of polypropylene/MAH-<i>g</i>-POE/clay composites

TOUGHENING OF ETHYLENE-PROPYLENE RANDOM COPOLYMER/CLAY NANOCOMPOSITES： COMPARISON OF DIFFERENT COMPATIBILIZERS

Polypropylene-clay blends compatibilized with MAH-g-POE

Structure and Properties of Polypropylene/clay Nanocomposites Compatibilized by Solid‐phase Grafted Polypropylene

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Effect of MA-g-PP addition on mechanical properties of polypropylene/hollow glass spheres/nanoclay composites

Polypropylene nanocomposites produced by in‐situ grafting of maleic anhydride using different mixing procedures

Effect of Maleic‐anhydride‐grafted Polypropylene As a Compatibilizer on the Properties of Polypropylene/(modified Carbon Black) Composites

A New Method for Preparing Anhydride Grafted Polypropylene with High Grafting Ratio by Combining Microwave Reaction and Reactive Extrusion

Effects of Calcium Carbonate and Compounding Sequence on the Phase Morphology and Properties of Maleic Anhydride-Grafted Polypropylene Compatibilized Polyamide 6/polypropylene Blend

Study on Melt-Grafting of Maleic Anhydride Onto Polypropylene in the Presence of Styrene

Effect of compounding sequence on the morphology of organoclay-filled PA6/PP/MAPP blends

Rheological Study on High-Density Polyethylene/organoclay Composites

Preparation of poly(propylene)/clay layered nanocomposites by melt intercalation from pristine montmorillonite (MMT)

Combined Effect of Organic Phosphate Sodium and Nanoclay on the Mechanical Properties and Crystallization Behavior of Isotactic Polypropylene

Mechanical Properties and Morphology of Polypropylene/Polypropylene-g-Maleic Anhydride/Long Glass Fiber Composites

Effect of Multi-Monomer Grafted Polyolefin Elastomer/Polypropylene on the Structure and Properties of Polypropylene/Montmorillonite Nanocomposites