Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Effect of Organo-Montmorillonite on the Compatibility of Polyamide 66/polypropylene Blend

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Joint Effect of Compatibilizer and Organo-Montmorillonite on Compatibilization of Polyamide-6/Poly(Phenylene Oxide) Blend: Morphology and Properties

Influence of OMMT on Halogen-free Flame Retardant PC/ABS Blends

How Organo-Montmorillonite Truly Affects the Structure and Properties of Polypropylene

Mechanism and Effects of Organo-montmorillonite on the Mechanical Properties of PA6/PP Alloy

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Polypropylene/Ethylene-Octene Copolymer/Organic-Montmorillonite Nanocomposites

Effect of Multi-Monomer Grafted Polyolefin Elastomer/Polypropylene on the Structure and Properties of Polypropylene/Montmorillonite Nanocomposites

Investigation on polypropylene and polyamide-6 alloys/montmorillonite nanocomposites

Mechanism and Effect of Organo-montmorillonite on the Mechanical Properties of PA6/PP Alloy

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Structure and Properties of Polypropylene/clay Nanocomposites Compatibilized by Solid‐phase Grafted Polypropylene

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Effect of Nano Organic Montmorillonite on Structure and Heat Resistance of PA6/NMA

Compatibilization of Poly(lactic Acid)/ethylene‐propylene‐diene Rubber Blends by Using Organic Montmorillonite As a Compatibilizer

COMPARISON OF POLYAMIDE 66/MONTMORILLONITE NANOCOMPOSITES PREPARED FROM POLYAMIDE 6 AND POLYAMIDE 66 BASED MASTER-BATCHES

Study of Organic Montmorillonite Toughened Polypropylene Prepared by Direct Injection

Study of the Effect of Organomodified Montmorillonite on PP/APP/Si-E System

Preparation of Poly(l-Lactide)/poly(ethylene Glycol)/organo-Modified Montmorillonite Nanocomposites Via Melt Intercalation under Continuous Elongation Flow