Abstract:To develop eco-polymeric materials is of significant importance to protect the global environment and promote the sustainable development of human society. Poly (propylene carbonate) (PPC) as a new biodegradable polymer has attracted much interest, but some properties of PPC have to be improved before the practical utilization.In this work, the re-dispersible unmodified laponite and montmorillonite (MMT) were used as the nanometer reinforcing phase to enhance the mechanical property, thermal stability and oxygen barrier property of PPC. Via a simple solution mixing method, the PPC/laponite and PPC/MMT nanocomposites were fabricated. The unmodified laponite and MMT were well dispersed in the PPC matrix, which was confirmed by TEM results. As a result, the obtained PPC/clay nanocomposites exhibited high transparency (>80%) and enhanced storage modulus (100–150% higher than PPC), when the clay content was in a range of 1–10 wt%. In addition, the incorporation of lower than 3 wt% of laponite and MMT increased the elongation at break and thermal stability of PPC. The initial decomposition temperature (Td10%) of PPC/clay nanocomposites with 1 wt% clay was approximately 250 °C, which was substantially higher than that of pure PPC (215 °C). The PPC/clay nanocomposites with 7 wt% clay displayed the lowest O2 permeability, which was two orders of magnitude lower than that of pure PPC. Therefore, the resultant PPC/clay nanocomposites with enhanced properties have a potential to boost the practical utilization of PPC.

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Study on thermal stability of PP/MMT nanocomposites

Preparation and characterization of organic modified montmorillonite/polylactic acid nanocomposites

Preparation and Properties of Polyurethane/Montmorillonite Nanocomposites Cured under Room Temperature

Preparation and structure of poly(styrene-acrylonitrile)/montmorillonite nanocomposite

Preparation and Structure of Polystyrene/Montmorillonite Nanocomposite

Preparation of Polypropylene/MMT Nanocomposites Using Complex Supported Catalysts

Poly(propylene carbonate)/clay nanocomposites with enhanced mechanical property, thermal stability and oxygen barrier property

Investigation Into Poly(propylene)/Montmorillonite/Calcium Carbonate Nanocomposites

Effect of Multi-Monomer Grafted Polyolefin Elastomer/Polypropylene on the Structure and Properties of Polypropylene/Montmorillonite Nanocomposites

Preparation and thermal stability of polypropylene/montmorillonite nanocomposites

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Improved molecular chain constraint of poly (propylene carbonate) composites by the synergistic effect of poly (vinyl alcohol) and carbon nanotubes

Structural characterization and thermal and mechanical properties of poly(propylene carbonate)/MgAl-LDH exfoliation nanocomposite via solution intercalation

Investigation on polypropylene and polyamide-6 alloys/montmorillonite nanocomposites

Synthesis and characterization of polycarbonate/ABS/montmorillonite nanocomposites

Effect of molding on the structure and properties of poly(butylene adipate-co-terephthalate)/poly(propylene carbonate)/organically modified montmorillonite nanocomposites

Preparation and characterization of poly(butylene terephthalate) nanocomposites from thermally stable organic-modified montmorillonite

Preparation of poly(propylene)/clay layered nanocomposites by melt intercalation from pristine montmorillonite (MMT)