Abstract:Ethylene/propylene-random-copolymer (PPR)/clay nanocomposites were prepared by two-stage melt blending. Four types of compatibilizers, including an ethylene-octene copolymer grafted maleic anhydride (POE-g-MA) and three maleic-anhydride-grafted polypropylenes (PP-g-MA) with different melt flow indexes (MFI), were used to improve the dispersion of organic clay in matrix. On the other hand, the effects of organic montmorillonite (OMMT) content on the nanocomposite structure in terms of clay dispersion in PPR matrix, thermal behavior and tensile properties were also studied. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) results show that the organic clay layers are mainly intercalated and partially exfoliated in the nanocomposites. Moreover, a PP-g-MA compatibilizer (compatibilizer B) having high MFI can greatly increase the interlayer spacing of the clay as compared with other compatibilizers. With the introduction of compatibilizer D (POE-g-MA), most of the clays are dispersed into the POE phase, and the shape of the dispersed OMMT appears elliptic, which differs from the strip of PP-g-MA. Compared with virgin PPR, the Young’s modulus of the nanocomposite evidently increases when a compatibilizer C (PP-g-MA) with medium MFI is used. For the nanocomposites with compatibilizer B and C, their crystallinities (X c) increase as compared with that of the virgin PPR. Furthermore, the increase of OMMT loadings presents little effect on the melt temperature (T m) of the PPR/OMMT nanocomposites, and slight effect on their crystallization temperature (T c). Only compatibilizer B can lead to a marked increases in crystallinity and T c of the nanocomposite when the OMMT content is 2 wt%.

Preparation and thermal stability of polypropylene/montmorillonite nanocomposites

Study on thermal stability of PP/MMT nanocomposites

Preparation and Properties of Polyurethane/Montmorillonite Nanocomposites Cured under Room Temperature

Preparation and characterization of poly(propylene carbonate)/montmorillonite nanocomposites by solution intercalation

Preparation and characterization of organic modified montmorillonite/polylactic acid nanocomposites

Preparation and structure of poly(styrene-acrylonitrile)/montmorillonite nanocomposite

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

Preparation of poly(propylene)/clay layered nanocomposites by melt intercalation from pristine montmorillonite (MMT)

Novel Preparation of Poly(propylene)–layered Silicate Nanocomposites

Preparation and characterization of poly(butylene terephthalate) nanocomposites from thermally stable organic-modified montmorillonite

Investigation Into Poly(propylene)/Montmorillonite/Calcium Carbonate Nanocomposites

Poly(butylene terephthalate)/Clay Nanocomposites directly Prepared from Pristine Montmorillonite (MMT)

Preparation and Properties of PA6/Epoxy-resin-modified Montmorillonite Nanocomposites

Effect of Organically Modified Montmorillonite on Thermal Degradation Mechanism of Polycarbonate Nanocomposites

Investigation on polypropylene and polyamide-6 alloys/montmorillonite nanocomposites

A Study on the Synthesis and Properties of Polyurethane/Clay Nanocomposites

Morphology, Thermal and Mechanical Properties of Poly (Styrene-Acrylonitrile) (SAN)/Clay Nanocomposites from Organic-Modified Montmorillonite

Preparation and characterization of poly (styrene-acrylonitrile) (SAN)/clay nanocomposites by melt intercalation

Effect of Multi-Monomer Grafted Polyolefin Elastomer/Polypropylene on the Structure and Properties of Polypropylene/Montmorillonite Nanocomposites

Preparation of Polypropylene/Polystyrene/Montmorillonite Nanocomposites

TOUGHENING OF ETHYLENE-PROPYLENE RANDOM COPOLYMER/CLAY NANOCOMPOSITES： COMPARISON OF DIFFERENT COMPATIBILIZERS