Abstract:ABSTRACTThis work focuses on phase morphology and properties of immiscible poly(lactic acid)/ethylene‐propylene‐diene rubber (PLA/EPDM) blends compatibilized with organic montmorillonite (OMMT). Effect of OMMT loading on phase morphology, mechanical properties, and blown film bubble stability was investigated. Transmission electron micrographs show that a large number of OMMT nanolayers locate at interfacial region between PLA and EPDM phase, as well as in EPDM phase due to higher affinity of OMMT with EPDM. Scanning electron micrographs show that EPDM domain size decreases largely with increasing OMMT loading, which is associated with reduction of interfacial energy and inhibition of coalescence by the OMMT locating at the interface, acting as an emulsifier to enwrap the discrete domains. As OMMT loading increases from 0 to 1 phr, elongation at break increases from 20.4 to 151.7% and notched impact strength is enhanced from 8.2 to 31.7 kJċm−2. The reduced EPDM domain is the main reason for enhanced toughness of PLA/EPDM/OMMT samples according to crazing with shear yielding mechanism. However, with more than 2 phr of OMMT, the toughness decreases largely due to excessive stress concentration and OMMT aggregation. Attempts were made to produce ductile films from the PLA/EPDM/OMMT nanocomposites by using blown film extrusion. Improvement in blown film bubble stability and tensile ductility of PLA/EPDM/OMMT films also shows that OMMT is an efficient compatibilizer, as well as a processing aid for PLA/EPDM blends. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 44192.

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

Joint Effect of Compatibilizer and Organo-Montmorillonite on Compatibilization of Polyamide-6/Poly(Phenylene Oxide) Blend: Morphology and Properties

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

THE EFFECT OF SMA,OMMT ON THE MORPHOLOGY AND MECHANICALPROPERTIES OF PA6/ABS BLENDS

Phase morphology evolution and compatibilization of immiscible polyamide 6/polystyrene blends using nano‐montmorillonite

Effect of Organo-Montmorillonite on the Compatibility of Polyamide 66/polypropylene Blend

Compatibilization of Poly(lactic Acid)/ethylene‐propylene‐diene Rubber Blends by Using Organic Montmorillonite As a Compatibilizer

Reactive Compatibilization of Polyamide 6/Olefin Block Copolymer Blends: Phase Morphology, Rheological Behavior, Thermal Behavior, and Mechanical Properties

Synergistic Effects of Silica Nanoparticles and Reactive Compatibilizer on the Compatibilization of Polystyrene/polyamide 6 Blends

Effect Of Polymer Matrix/Montmorillonite Compatibility On Morphology And Melt Rheology Of Polypropylene Nanocomposites

Influences of Compatibilizers on Rheology and Mechanical Properties of Propylene Random Copolymer/styrene‐ethylene‐butylene‐styrene Block Copolymer/organic‐montmorillonite Nanocomposites

Compatibilization Effect of MMA-co-GMA Copolymers on the Properties of Polyamide 6/poly(vinylidene Fluoride) Blends

Polyamide 6/maleated ethylene-propylene-diene rubber/organoclay composites with or without glycidyl methacrylate as a compatibilizer

Effect of Compatibizer Glycidul Methacrylate on the PA6/SEBS-g-MA/OMMT Nanocomposites

Compatibilization of HDPE/PS blending system by surface-modified montmorillonite

Reactive Compatibilization of Poly(Phenylene Oxide)/Polyamide 6 Blended with Poly(Phenylene Oxide) Grafted Glycidyl Methacrylate Copolymer

Enhancing the Properties of Water-Soluble Copolymer Nanocomposites by Controlling the Layer Silicate Load and Exfoliated Nanolayers Adsorbed on Polymer Chains

Dual Effects of Compatibilizer on the Formation of Oriented Ribbon-Like Dispersed Phase Domains in Polystyrene/polyamide 6 Blends

Effect of Montmorillonite on the Crystallization, Rheological and Physical Behavior of Polyamide-6/Polylactic Acid Blends

Compatibilization of Nanometer-Sized TiO_2 on Polypropylene/Polyamide 6 Blends

Effect of Montmorillonite on Morphology, Rheology, and Properties of a Poly[styrene–(ethylene-Co-butylene)–styrene]/poly(ɛ-caprolactone) Nanocomposite