Abstract:Ultrahigh molecular weight polyethylene (UHMWPE)/organic montmorillonite (OMMT) nanocomposites were prepared via a self-made vane mixer which could supply a synergy of ultrasound and extensional deformation. Structure and working principle of this novel mixer were illustrated in detail. Effects of the OMMT content, mixing time, and ultrasound treat time on composites' morphology, rheological properties, and thermal properties were reported in terms of transmission electron microscopy (TEM), wide-angle X-ray scattering, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). X-ray diffraction (XRD) and TEM showed that the OMMT lay spacing increased from 2.82 nm to 3.29 nm and OMMT dispersed evenly in the matrix using this novel melt mixing equipment. It certified that the melt mixing procedure synergized by ultrasound and extensional deformation was very effective in the exfoliation of silicate layers and also the filler distribution and dispersion. DSC measurements revealed that the crystallization temperature (T-c) had no visible change with increasing the OMMT content and the melting temperature (T-m) and melting enthalpy crystallinity (X-c) increased with the proper OMMT content. The higher T-m and X-c showed with the proper ultrasound treatment time, however, the T-c had no visible change. TGA showed that the onset temperature at which 20% weight loss of the material increased markedly in the case of UHMWPE/OMMT-1 wt% nanocomposite. The onset temperature slightly decreased with the use of ultrasound. Rheological analyses showed that all the samples exhibited non-Newtonian and shear thinning characteristics. Both the storage modulus and complex viscosity increased with continuous addition of the OMMT layers. It also indicated that the introduction of ultrasound tended to decrease the storage modulus and complex viscosity. Universal tensile test indicated that superior tensile strength occurred in samples containing OMMT layers.

Compatibilization of HDPE/PS blending system by surface-modified montmorillonite

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

Combination of double-modified clay and polypropylene-graft-maleic anhydride for the simultaneously improved thermal and mechanical properties of polypropylene

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Joint Effect of Compatibilizer and Organo-Montmorillonite on Compatibilization of Polyamide-6/Poly(Phenylene Oxide) Blend: Morphology and Properties

Compatibilization of Poly(lactic Acid)/ethylene‐propylene‐diene Rubber Blends by Using Organic Montmorillonite As a Compatibilizer

Effect of Organo-Montmorillonite on the Compatibility of Polyamide 66/polypropylene Blend

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

A facile strategy for preparing Gemini surfactant-modified montmorillonite and its effect on the morphology and mechanical properties of polyethylene/polystyrene

Unsaturated Polyester Modified by Polyurethane and Oganomodified-Montmorillonite Hybrids

Study of Nanocomposites Prepared by Melt Blending Tpu and Montmorillonite

Polypropylene/Ethylene-Octene Copolymer/Organic-Montmorillonite Nanocomposites

Studies of polypropylene modified by waste of PMMA/ABS/UPR multilayer plates

Preparation of Poly(l-Lactide)/poly(ethylene Glycol)/organo-Modified Montmorillonite Nanocomposites Via Melt Intercalation under Continuous Elongation Flow

Effect of Organic Montmorillonite on Stability of PE Composite

Compatibilization Mechanism of PC/UHMWPE/HDPE-g-GMA by Reactive Extrusion Process

Ultrasound-assisted Melt Mixing for the Preparation of UHMWPE/OMMT Nanocomposites

Effect of Montmorillonite on Morphology, Rheology, and Properties of a Poly[styrene–(ethylene-Co-butylene)–styrene]/poly(ɛ-caprolactone) Nanocomposite

Effects of Novel Vane Mixer on the Structure and Properties of HDPE/OMMT Nanocomposites

Preparation and Properties of Chlorosulfonated Polyethylene/organomontmorillonite Nanocomposites