Abstract:ABSTRACTThis work focuses on phase morphology and properties of immiscible poly(lactic acid)/ethylene‐propylene‐diene rubber (PLA/EPDM) blends compatibilized with organic montmorillonite (OMMT). Effect of OMMT loading on phase morphology, mechanical properties, and blown film bubble stability was investigated. Transmission electron micrographs show that a large number of OMMT nanolayers locate at interfacial region between PLA and EPDM phase, as well as in EPDM phase due to higher affinity of OMMT with EPDM. Scanning electron micrographs show that EPDM domain size decreases largely with increasing OMMT loading, which is associated with reduction of interfacial energy and inhibition of coalescence by the OMMT locating at the interface, acting as an emulsifier to enwrap the discrete domains. As OMMT loading increases from 0 to 1 phr, elongation at break increases from 20.4 to 151.7% and notched impact strength is enhanced from 8.2 to 31.7 kJċm−2. The reduced EPDM domain is the main reason for enhanced toughness of PLA/EPDM/OMMT samples according to crazing with shear yielding mechanism. However, with more than 2 phr of OMMT, the toughness decreases largely due to excessive stress concentration and OMMT aggregation. Attempts were made to produce ductile films from the PLA/EPDM/OMMT nanocomposites by using blown film extrusion. Improvement in blown film bubble stability and tensile ductility of PLA/EPDM/OMMT films also shows that OMMT is an efficient compatibilizer, as well as a processing aid for PLA/EPDM blends. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016, 133, 44192.

Phase morphology evolution and compatibilization of immiscible polyamide 6/polystyrene blends using nano‐montmorillonite

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

Joint Effect of Compatibilizer and Organo-Montmorillonite on Compatibilization of Polyamide-6/Poly(Phenylene Oxide) Blend: Morphology and Properties

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Preparation and Properties of PA6/Epoxy-resin-modified Montmorillonite Nanocomposites

Effect of Organo-Montmorillonite on the Compatibility of Polyamide 66/polypropylene Blend

Effect of Migration of Layered Nanoparticles During Melt Blending on the Phase Morphology of Poly (ethylene Terephthalate)/polyamide 6/montmorillonite Ternary Nanocomposites

Influences of organic montmorillonite on the combustion behaviors and thermal stability of polyamide 6/polystyrene blends

Investigation on polypropylene and polyamide-6 alloys/montmorillonite nanocomposites

Polypropylene/Ethylene-Octene Copolymer/Organic-Montmorillonite Nanocomposites

Effect of Nano Organic Montmorillonite on Structure and Heat Resistance of PA6/NMA

Thermal–oxidative Degradation and Accelerated Aging Behavior of Polyamide 6/epoxy Resin‐modified Montmorillonite Nanocomposites

COMPARISON OF POLYAMIDE 66/MONTMORILLONITE NANOCOMPOSITES PREPARED FROM POLYAMIDE 6 AND POLYAMIDE 66 BASED MASTER-BATCHES

Reactive Compatibilization of Polyamide 6/Olefin Block Copolymer Blends: Phase Morphology, Rheological Behavior, Thermal Behavior, and Mechanical Properties

Compatibilization of Poly(lactic Acid)/ethylene‐propylene‐diene Rubber Blends by Using Organic Montmorillonite As a Compatibilizer

Structure, morphology and mechanical properties of nanocomposite of polyurethane/poly(methyl methacrylate)/organo-montmorillonite

Influences of Compatibilizers on Rheology and Mechanical Properties of Propylene Random Copolymer/styrene‐ethylene‐butylene‐styrene Block Copolymer/organic‐montmorillonite Nanocomposites

Toughened Nylon66/Nylon6 Ternary Nanocomposites By Elastomers

Effect of Compatibizer Glycidul Methacrylate on the PA6/SEBS-g-MA/OMMT Nanocomposites

Structure and Properties of Polypropylene/clay Nanocomposites Compatibilized by Solid‐phase Grafted Polypropylene

Investigation on Morphology and Mechanical Properties of Polyamide 6/maleated Ethylene‐propylene‐diene Rubber/organoclay Composites