Abstract:In this study, three cationic surfactants (hexadecyltrimethylammonium chloride, hexadecyldimethylbenzylammonium chloride, and octadecyltrimethylammonium chloride) were used to modify montmorillonite and polyethylene (PE)/maleic anhydride grafted polyethylene (PE-g-MAH)/organic-montmorillonite (Org-MMT) nano-composites, prepared by two blending processes (direct-melt blending and solution blending). X-ray diffractometry and transmission electron microscopy were used to investigate the intercalation behavior and microstructure of composites. Mechanical properties were also tested. It was found that the intercalation effect of PE/PE-g-MAH/Org-MMT could be enhanced by increasing the content of PE-g-MMT, using the silicate modified by a cationic surfactant with a benzyl group or long alkyl chain, adopting the solution-blending method or using high-density polyethylene as matrix. The degree of crystallinity of composites and the crystalline thickness perpendicular to the crystalline plane [like (110) and (200)] decreased with increasing amounts of PE-g-MAH and, under certain prescription, the crystalline thickness of the composite made by the solution method was much smaller than that made by direct-melt blending. This clearly showed that Org-MMT and PE-g-MAH had a heterogeneous nucleation effect on crystallization of PE from the melt, resulting in a decrease of crystalline thickness, and the heterogeneous nucleation effect was more evident in the nanocomposite made by the solution-blending method than in that made by the direct-melt intercalation process. The tensile strength initially increased and then decreased with increasing contents of PE-g-MAH. The maximum value in tensile strength (23.3 MPa) was achieved when the concentration of PE-g-MAH was 6 wt %. The impact strength increased concomitantly with the content of PE-g-MAH; it was 122.2 J/m when the concentration of PE-g-MAH was 9 wt %. (C) 2004 Wiley Periodicals, Inc.

Preparation and Flammability Properties of Polyethylene/clay Nanocomposites by Melt Intercalation Method from Na+ Montmorillonite

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Intumescent flame retardant-montmorillonite synergism in polypropylene-layered silicate nanocomposites

Poly(propylene)/clay nanocomposites and their application in flame retardancy

Effect of the Phosphorus–Nitrogen-Containing Quaternary Ammonium Salt Structure on the Flammability Properties of Poly(methyl Methacrylate)/montmorillonite Nanocomposites

Polyethylene/Clay Nanocomposite: Review of the Synthetic Routes and Material Properties

Study on thermal stability of PP/MMT nanocomposites

Preparation and Flammability of Ethylene-Vinyl Acetate Copolymer/montmorillonite Nanocomposites

Nanoclay, intumescent flame retardants, and their combination with chemical modification for the improvement of the flame retardant properties of polymer nanocomposites

Preparation of poly(propylene)/clay layered nanocomposites by melt intercalation from pristine montmorillonite (MMT)

Polypropylene/Montmorillonite Nanocomposites And Intumescent, Flame-Retardant Montmorillonite Synergism In Polypropylene Nanocomposites

Flammability and phase-transition studies of nylon 6/montmorillonite nanocomposites

Combustion Properties of Polypropylene/montmorillonite Nanocomposites

Preparation, thermal and flammability of halogen‐free flame retarding thermoplastic poly(Ether‐Ester) elastomer/montmorillonite nanocomposites

Preparation and Combustion Properties of Flame Retardant Nylon 6/Montmorillonite Nanocomposite

Flammability and thermal stability studies of ABS/Montmorillonite nanocomposite

Investigation Into Poly(propylene)/Montmorillonite/Calcium Carbonate Nanocomposites

Preparation and Characterization of Flame Retardant Abs/Montmorillonite Nanocomposite

Polyethylene/maleic Anhydride Grafted Polyethylene/organic‐montmorillonite Nanocomposites. I. Preparation, Microstructure, and Mechanical Properties

Preparation and characterization of poly (styrene-acrylonitrile) (SAN)/clay nanocomposites by melt intercalation