Abstract:Polymers are widely used in our day-to-day lives and we are often oblivious to the fire hazard imposed by these hydrocarbon-based materials. This paper introduces the application of fire retardant nanofillers for enhanced flame retardancy as a potential remedy for flame spread. The paper also investigates changes in mechanical properties as a result of nanofiller addition. For this purpose, neat polystyrene (PS), PS-silica and PS-montmorillonite (MMT) have been prepared via in-situ polymerization method. The thermal degradation mechanism of the neat polymer and polymer nanocomposites and the effect of nanoparticle loading on thermal properties have been investigated using Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC) equipment. TGA and corresponding Derivative TG (DTG) results show that there has been improvement in thermal stability for the nanocomposites. PS-1 wt% silica and PS-3 wt% silica nanocomposites have shown approximately 23% and 15% reduction of Peak Mass Loss Rate (PMLR) respectively. The polymer nanocomposites also showed 72–87% more char yield with respect to neat PS. The glass transition temperature (Tg) as measured by the DSC was comparable to those obtained by the Dynamic Mechanical Analysis (DMA) and the greatest agglomeration was observed for PS-3 wt% MMT. According to the nanoindentation results, there was reduction in hardness of the nanocomposites compared to the neat polystyrene. It was concluded that the addition of nanosilica and nanoclay in small loading can significantly improve thermal stability and mechanical properties; however, higher loading may result in agglomeration and reduction in hardness.

Effect of the Phosphorus–Nitrogen-Containing Quaternary Ammonium Salt Structure on the Flammability Properties of Poly(methyl Methacrylate)/montmorillonite Nanocomposites

Nanoclay, intumescent flame retardants, and their combination with chemical modification for the improvement of the flame retardant properties of polymer nanocomposites

Study of Thermal and Mechanical Behaviors of Flame Retardant Polystyrene-Based Nanocomposites Prepared Via In-Situ Polymerization Method

Effect of Trimethylolpropane Triacrylate Cross-Linkages on the Thermal Stability and Char Yield of Poly (methyl Methacrylate) Nanocomposites

Thermal Degradation and Flammability of Nanocomposites Composed of Silica Cross-Linked to Poly(Methyl Methacrylate)

Poly(propylene)/clay nanocomposites and their application in flame retardancy

Preparation and Flammability Properties of Polyethylene/clay Nanocomposites by Melt Intercalation Method from Na+ Montmorillonite

Intumescent flame retardant-montmorillonite synergism in polypropylene-layered silicate nanocomposites

Preparation and Characterization of Flame Retardant Abs/Montmorillonite Nanocomposite

Flammability and thermal stability studies of ABS/Montmorillonite nanocomposite

Preparation, thermal and flammability of halogen‐free flame retarding thermoplastic poly(Ether‐Ester) elastomer/montmorillonite nanocomposites

Polypropylene/Montmorillonite Nanocomposites And Intumescent, Flame-Retardant Montmorillonite Synergism In Polypropylene Nanocomposites

Synergistic Flammability and Thermal Stability of Polypropylene/aluminum Trihydroxide/fe‐montmorillonite Nanocomposites

A polymeric flame retardant and surfactant-free montmorillonite nanocomposites: Preparation and exfoliation mechanism discussion

Flammability of Carbon Nanofiber–clay Nanopaper Based Polymer Composites

Flammability and phase-transition studies of nylon 6/montmorillonite nanocomposites

Preparation and Combustion Properties of Flame Retardant Nylon 6/Montmorillonite Nanocomposite

Morphology, Thermal, and Mechanical Properties of Flame-Retardant Silicone Rubber/Montmorillonite Nanocomposites

Preparation and Property of Inherent Flame Retardant Polystyrene /Clay Nanocomposites

Investigation of nanocomposite system with long-chain phosphorus-containing intercalator-modified montmorillonite nanosheets

Study on Flame Resarded PMMA/Montmorillonite Nanocomposite