Abstract:To achieve grain refinement, the recrystallization behavior of B2 matrix phase in a Ti2AlNb-based alloy was investigated by performing a series of thermal compression tests at temperatures in the range of 950~1025°C with strain rates from 0.001s−1 to1s−1. Instead of water quenching immediately after deformation, samples were further held at deformation temperature for a certain time, in order to make the heat-affecting time at various strain rates consistent. Electron back scattered diffraction (EBSD) technique was employed for microstructure analysis, in combination with grain orientation spread (GOS) method to distinguish recrystallized grains from non-recrystallized grains. The results reveal that: (i) dynamic recrystallization (DRX) is not easy to occur in this alloy, and increasing strain rate leads to a decrease of DRX fraction; (ii) when evaluated on the same time scale, the sample at strain rate of ε˙=0.1s−1 has the highest recrystallized fraction among all applied strain rates, which provides sufficient nucleation rate of DRX as well as notable grain growth during post-dynamic recrystallization (PDRX); and (iii) the recrystallization evolution with temperature changes is closely linked to the phase transformation in Ti2AlNb. The presence of O and α2 phases affects recrystallization process via pinning effect and particle stimulated nucleation (PSN) mechanism. This work therefore provides a new understanding of recrystallization behavior during and post deformation of Ti2AlNb-based alloy, which is meaningful to refine grains by combining the contributions of DRX and PDRX.

The α2 precipitation from equiaxed γ phase in as-cast Ti-44Al-4Nb-2Cr-0.1B alloy

The precipitation mechanism of secondary α-phase and formation of a bimodal microstructure in Ti6242S alloy cooled from the α + β phase field

Early Stages of Precipitation in Γ' Phase of a Ni–Al–Ti Model Alloy: Phase-Field and First-Principles Study

Microstructure Evolution and Phase Transformations in Ti-22Al-25Nb Alloys Tailored by Super-Transus Solution Treatment

Microstructure Evolution and Nano-Precipitate of Multi-Stage Heat-Treated Ti–45Al–2Nb–2Cr-0.3C Alloy

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Deformation and Phase Transformation of Disordered α Phase in the (α + γ) Two-Phase Region of a High-Nb TiAl Alloy

B2 phase precipitation behavior in Ti–40Al–8Nb alloys during the hot deformation process

Investigation of the Phase Transformations in Ti 22al 25nb Alloy

Precipitation behaviors and orientation evolution mechanisms of α phases in Ti-55511 titanium alloy during heat treatment and subsequent hot deformation

Phase Transformation and Microstructure Evolution of Differently Processed Ti–45Al–9Nb–Y Alloy

Growth morphology and crystallography of precipitate in a new high-temperature structural intermetallic Ti–40Al–10Fe

TEM characterization of the precipitation reaction in Ti–48Al–10Nb alloy

Investigation on Transformation-Related Recrystallization Behavior of Ti2AlNb-based Alloy

Novel transformation pathway and heterogeneous precipitate microstructure in Ti-alloys

Transmission Electron Microscopic Investigation of the Γ→α Phase Transformation in a Ti–45Al–5Nb Alloy

β0 precipitation in α2 lamellae of the β-solidifying multiple-phase γ-TiAl alloy

Hot tensile behavior of a TiAl alloy with a (β0 + γ) microduplex microstructure prepared simply by heat treatments

Microstructure refinement of Ti-40Al-8Nb alloys via the decomposition of the metastable B2 phase at 1000 °C

The microstructure and properties of as-extruded γ-TiAl