Abstract:Morphology evolution and orientation characteristics of precipitate of ultra-high strength titanium alloy was investigated in the present work. The continuous cooling tests were performed to control the precipitation of α phase after preservation in single-phase zone. The α GB (grain boundary α) is preferentially precipitated, followed by α I (intragranular α) during the continuous cooling process. Orientation of α GB is related to orientation of β grains on both sides of grain boundary and habit plane. The θ is proposed to represent the angle between the axis of misorientation and normal of the habit plane, and it can be used as an important index to judge orientation characteristics of α GB . Orientation of the flat α GB is characterized by a single orientation or two similar orientations when the θ<30°. The irregular α GB contains a greater number of α variants, and there is no obvious dominant variant when the θ>30°. The α I precipitated at different positions can contain the theoretical 12 α variants. However, α I nucleated at α GB is easily affected by the orientation of α GB. In this case, the strong variant selection occurs, which leads to the formation of colony structure. By contrast, the variant selection of α I , which is precipitated spontaneously in β phase, is not obvious. Under this condition, the basket-weave structure is formed. In addition, the existence of α GB with single orientation provides a convenient condition for the formation of colony α I . The basket-weave structure has better comprehensive properties, however, the opposite is true for colony structure. Therefore, strong variant selection of α I needs to be inhibited in order to effectively prevent the formation of colony structure, which requires that the orientation characteristics of α GB must be controlled.

Precipitation behaviors and orientation evolution mechanisms of α phases in Ti-55511 titanium alloy during heat treatment and subsequent hot deformation

Effect of β recrystallization on the precipitation evolution of primary α phase and the phase transformation inheritance during thermomechanical processing in Ti-55511 alloy

Morphology evolution and orientation characteristics of precipitate of ultra-high strength titanium alloy

The evolution of primary alpha phase and its effect on microtexture in Ti6242S during post-deformation heat treatment

Hot Deformation Behavior of a Novel Near-β Titanium Alloy Ti-5.5Mo-6V-7Cr-4Al-2Sn-1Fe in (α+β) Phase Region

The precipitation mechanism of secondary α-phase and formation of a bimodal microstructure in Ti6242S alloy cooled from the α + β phase field

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Multi-scale characterization of deformation features and precipitation behavior in a near β-Ti alloy

Characterization of Hot Deformation Microstructure of a Near Beta Titanium Alloy Ti-5553

Investigation of High-Temperature Constitutive Behavior of Ti555211 Titanium Alloy Subjected to Plastic Deformation in the Different Phase Regions

Microstructural evolution and FCC twinning behavior during hot deformation of high temperature titanium alloy Ti65

The α2 precipitation from equiaxed γ phase in as-cast Ti-44Al-4Nb-2Cr-0.1B alloy

Orientation effect on / phase interface mediated deformation mechanism in titanium alloy

Deformation and Phase Transformation of Disordered α Phase in the (α + γ) Two-Phase Region of a High-Nb TiAl Alloy

The role of the ω phase on the microstructure evolution of precipitation and mechanical property in Ti-3Al-5Mo-4Cr-2Zr-1Fe

Study on High-Temperature Flow Behavior and Substructure and Texture Evolution of TA15 Titanium Alloy

Effects of Plastic Deformation and Aging Treatment on Phase Precipitation in Ti2AlNb Alloy

Mechanisms of grain boundary α precipitation in the metastable β-Titanium Ti-5Al-5Mo-5V-3Cr

B2 phase precipitation behavior in Ti–40Al–8Nb alloys during the hot deformation process

Phase Precipitation Behavior During Isothermal Deformation in Β-Quenched Near Beta Titanium Alloy Ti-7333

High-temperature deformation behavior and recrystallization mechanism of a near beta titanium alloy Ti-55511 in β phase region