Effect of phase content on mechanical properties and deformation mechanism in TC21 titanium alloy: An in-situ tensile investigation
Honghui Li,Ke Wang,Renlong Xin
DOI: https://doi.org/10.1016/j.rinp.2023.107033
IF: 4.565
2023-10-05
Results in Physics
Abstract:This work fabricated a series of microstructures consisting of different equiaxed α (α eq ) and β phase contents to investigated the effect of phase content on mechanical properties and deformation mechanism, including slip initiation, slip transfer, stress-induced martensite (SIM) and crack nucleation of TC21 titanium alloy. The results show that, with the decrease of α eq phase content, the YS of the alloy firstly decreases and then increases, the UTS gradually increases, and the EL gradually decreases. The significant variation of mechanical properties is closely related to the deformation mechanism of microstructures with different α eq phase contents. In sample with high α eq phase content, α eq phase is deformed by slip prior to β phase, and with the increase of strain, β phase can coordinate deformation by slip initiation and exhibits a better ability to coordinate plastic deformation. In samples with medium α eq phase content, the stability of β phase decreases, slip in α eq grain and SIM in β grain can be initiated simultaneously. However, the formation of SIM would harden β phase, and with the increase of strain, it would restrain the ability of β phase to further coordinate plastic deformation. In samples with low α eq phase content, the stability of β phase decreases sharply, which could induce the precipitation of fine-lamellar secondary α (α s ) and acicular martensite α'' in β grain during annealing. These precipitated α s and α'' can not only inhibit the formation of SIM, but also dramatically reduce the ability of β phase to coordinate plastic deformation. Meanwhile, the evolution of deformation mechanism in different samples can significantly influence the crack nucleation location (slip band or α eq /β interface) during deformation. This paper analyzes in detail the effect of α eq phase content on mechanical properties of TC21 titanium alloy based on deformation mechanism, it would contribute to the establishment of a relationship among phase content, deformation mechanism and mechanical properties.
physics, multidisciplinary,materials science