Abstract:A novel thermal- deformable Ti- 43Al- 3.5Mn-0.5W (at%) alloy was designed and fabricated. The microstructure characterization, room and elevated temperature tensile mechanical properties, oxidation resistance, and deformation capacity of the alloy were investigated. The results indicate that compared with Ti-42Al- 5Mn, the developed alloy has better strength, high temperature oxidation resistance and thermal deformation ability. The alpha(2) and beta(o) phases of the alloy have lower Mn content, which reduces the precipitation tendency of Mn-rich Laves phase near the service temperature. The evolution of the phases in the alloy can be generalized as follows: beta ->beta+alpha ->beta +alpha +gamma ->beta +beta(o)+alpha +alpha(2)+gamma ->beta(o)+alpha(2)+gamma, with the T gamma- solv approximate to 1250 degrees C, T-beta approximate to 1360 degrees C. The microstructure of the forged alloy is lamellar structure and a large number of beta(o) and gamma mixed phases at the lamellar interface. The high temperature strength of the forged alloy decreases obviously. Through two-step heat treatment, the high temperature strength and stability of the forged alloy are improved to a certain extent, which is mainly attributed to the increase in lamellar structure content and the refinement size of lamellar colonies. At 800 degrees C, the yield strength, tensile strength, and elongation of the forged alloy treated with 1260 degrees C/ 0.5 h/AC+ 800 degrees C/3 h/FC were 320 MPa, 555 MPa, and 16%, respectively.

High-Resolution and Analytic Electron Microscopy Investigations on the Microstructure of A Tial (W, Si) Alloy

B2 precipitates and distribution of W in a Ti–47Al–2W–0.5Si alloy

Investigations of Microstructure and Electronic Structure of Ti3SiC2 and TiAl

On the Orientation Relationship Between Ti5Si3 Precipitates and B2 Phase in a Ti-47Al-2W-0.5Si Alloy

Microstructure Evolution in TiAl Alloyed with Si

Thermal stability and its effects on the mechanical properties of rapidly solidified Al-Ti alloys

Topics on Microstructure Researches in TiAl Intermetallics Using Atomic Scale Observation and Computational Simulation

The α2 precipitation from equiaxed γ phase in as-cast Ti-44Al-4Nb-2Cr-0.1B alloy

Study of the Ti2al Phase and Gb Structures in Tial Intermetallics Using Atomic Scale Observation and Computational Simulation

Microstructure and transformation of electron beam welded joints of TiAl base alloy

Microstructure Evolution of Ti–46Al–6Nb–（Si,B） Alloys During Heat Treatment with W Addition

Microstructural stability and tensile properties of a Ti-containing single-crystal Co–Ni–Al–W-base alloy

Microstructures and mechanical properties of in-situ TiB2/Al−xSi−0.3Mg composites

Interface and precipitate investigation of a TiB2 particle reinforced NiAl in-situ composite

The Crystal Structure, Microhardness and Thermal Stability of the Ti26Al55Zn19 Alloy

Microstructural Characterization of Melt Extracted High-Nb-Containing TiAl-Based Fiber

Microstructure Evolution and Phase Transformations in Ti-22Al-25Nb Alloys Tailored by Super-Transus Solution Treatment

Microstructure characterization and tensile performance of a high-strength titanium alloy with in-situ precipitates of Ti5Si3

Microstructure and Mechanical Properties of Novel Ti-Al- Mn- W Alloy

Microstructure Evolution and Nano-Precipitate of Multi-Stage Heat-Treated Ti–45Al–2Nb–2Cr-0.3C Alloy

Selective electron beam melting of TiAl alloy: Microstructure evolution, phase transformation and microhardness